Reference Guide

RAC1073
Message Unable to reset the threshold value of sensor arg1 because the capability to reset
this sensor threshold value is not supported.
Arguments arg1 = sensor name
Detailed
Description
The threshold value of the sensor identified in the message cannot be successfully
set because the capability reset the sensor threshold value is not supported.
Recommended
Response Action
No response action is required. For more information about resetting the threshold
level of a sensor, run the "racadm getsensorinfo" command at the command line
interface (CLI), and then retry the operation.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1109
Message Unable to run the command, because an incorrect Share type is entered.
Detailed
Description
Unable to run the command, because an incorrect Share type was entered.
Recommended
Response Action
Enter an appropriate Share location of the following types: FTP, NFS, or CIFS. For
more information, run the "racadm help update" command.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
1324