Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1060
Message System inventory may not be current because the Collect System Inventory On
Restart (CSIOR) feature is disabled.
Detailed
Description
The system inventory information may not be current because the Collect System
Inventory On Restart (CSIOR) feature is disabled.
Recommended
Response Action
To enable the CSIOR feature, run the RACADM command "racadm set
LifecycleController.LCAttributes.CollectSystemInventoryOnRestart 1". Then restart
the server to cause system inventory information to be collected.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1061
Message SystemErase operation initiated successfully.
Detailed
Description
The requested SystemErase operation was initiated successfully.
Recommended
Response Action
Check the job status by running the RACADM command: "racadm jobqueue view -i
<JobID>".
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
1317