Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1052
Message The Automatic Backup (autobackup) feature is not enabled.
Detailed
Description
The Automatic Backup (autobackup) feature is not enabled.
Recommended
Response Action
To enable, run the RACADM command "racadm set
lifecyclecontroller.lcattributes.autobackup 1".
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1053
Message Unable to view the Automatic Backup (autobackup) feature settings because the
feature has not been configured.
Detailed
Description
Unable to view the Automatic Backup (autobackup) feature settings because the
feature has not been configured.
Recommended
Response Action
Configure the Automatic Backup feature by running the RACADM command
"racadm systemconfig backup" with the desired option settings.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
1313