Reference Guide

Recommended
Response Action
Make sure to enable Collect System Inventory On Restart (CSIOR) feature, reboot
the server, and retry the operation. If CSIOR is already enabled, restart iDRAC using
"racadm racreset" command, and retry the operation.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1034
Message This action will ungracefully turn off the server.
Detailed
Description
This operation will cause the server to shutdown immediately. This may result in
the applications losing data.
Recommended
Response Action
Before continuing, exit all the programs running on this server, and make sure that
there is no inbound and outbound traffic associated with this server. Inability to do
so may prevent all the servers in the chassis from accessing the shared-storage
devices for up to two minutes. To continue the operation, enter a -f at the end of
command "racadm serveraction powerdown -f", and then retry.
Category System Health (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1035
Message There are no pending values to be cleared.
1304