Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1014
Message The SNMPv3 privacy protocol cannot be configured to AES or DES mode if
SNMPv3 authentication protocol state is set to "None".
Detailed
Description
The SNMPv3 privacy protocol cannot be configured to AES or DES mode if
SNMPv3 authentication protocol state is set to "None".
Recommended
Response Action
To configure the SNMPv3 Privacy Protocol for a specified iDRAC user, change the
SNMPv3 Authentication Protocol to either MD5 or SHA state using "racadm set
idrac.users.<index>.SNMPv3AuthenticationType <value>".
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1016
Message The specified user already exists. Duplicate user names are not allowed.
Detailed
Description
iDRAC does not allow duplicate user names for each of the 16 users.
Recommended
Response Action
Make sure that each of the 16 user names are unique.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
1295