Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1012
Message Unable to change the auto-negotiation state for the current NIC selection mode.
Detailed
Description
Unable to change the auto-negotiation state for the current NIC selection mode,
because the iDRAC NIC is in dedicated mode.
Recommended
Response Action
Change the iDRAC NIC mode to shared mode using "racadm set idrac.nic.selection
<value>", and retry the operation.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1013
Message The SNMPv3 authentication protocol state cannot be set to None if the SNMPv3
privacy protocol state is set to None.
Detailed
Description
For any iDRAC user, SNMPv3 authentication protocol can be changed to "None"
only if the SNMPv3 privacy protocol state is set to "None".
Recommended
Response Action
Change the SNMPv3 privacy protocol state to None using "racadm set
iDRAC.Users.<index>.SNMPv3PrivacyType none", and retry the operation.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
1294