Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1010
Message Unable to set the power cap value.
Detailed
Description
The power cap cannot be set if the object Power.Cap is disabled.
Recommended
Response Action
Enable Power Cap setting using "racadm set System.Power.Cap.Enable < 1 |
Enabled >", and retry the operation.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1011
Message The OS to iDRAC pass-through cannot be enabled.
Detailed
Description
The OS to iDRAC pass-through cannot be enabled, because the NIC is in
Dedicated mode.
Recommended
Response Action
Change the iDRAC NIC mode to shared mode using "racadm set idrac.nic.selection
<value>", and retry the operation.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
1293