Reference Guide

RAC0745
Message There are no pending operations present on the selected component group.
Detailed
Description
There are no pending operations on the selected component group.
Recommended
Response Action
No response action is required.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
RAC0746
Message Unable to perform virtual disk (VD) operations, because Lifecycle Controller is not
enabled.
Detailed
Description
Unable to perform virtual disk(VD) operations, because Lifecycle Controller is not
enabled.
Recommended
Response Action
Enable the Lifecycle Controller and retry the operation. To enable Lifecycle
Controller, restart the server. During server startup, press F2 to enter System Setup.
Go to iDRAC Settings -> Lifecycle Controller, select Enable, and save the changes.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0747
Message Unable to perform reset configuration on the selected controller, because Lifecycle
Controller is not enabled.
Detailed
Description
Unable to perform reset configuration on the selected controller, because Lifecycle
Controller is not enabled.
Recommended
Response Action
Enable the Lifecycle Controller and retry the operation. To enable Lifecycle
Controller, reboot the server. During server startup, press F2 to enter System Setup.
Go to iDRAC Settings -> Lifecycle Controller, select Enable, and save the changes.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
1275