Reference Guide

Recommended
Response Action
To enable Lifecycle Controller, reboot the server. During server startup, press F2 to
enter System Setup. Go to iDRAC Settings -> Lifecycle Controller, select Enable,
and save the changes. Retry the operation after the server has restarted.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0695
Message Unable to perform security key operations on the selected controller, because
Lifecycle Controller is not enabled.
Detailed
Description
Unable to perform security key operations on the selected controller, because
Lifecycle Controller is not enabled.
Recommended
Response Action
To enable Lifecycle Controller, reboot the server. During server startup, press F2 to
enter System Setup. Go to iDRAC Settings -> Lifecycle Controller, select Enable,
and save the changes. Retry the operation after the server has restarted.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0696
Message Unable to retrieve the hardware overview information because the server is turned
off.
Detailed
Description
The iDRAC is unable to retrieve hardware overview related information while the
server is turned off.
Recommended
Response Action
Turn the server on to view the hardware overview information.
Category Audit (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
RAC0697
Message Choose to create a job from the existing successful pending operations.
Detailed
Description
Choose to create a job from the existing successful pending operations.
1255