Reference Guide

No alerts are applicable for this message
RAC0689
Message Unable to create a virtual disk on the selected disk drives, because Lifecycle
Controller is not enabled.
Detailed
Description
Unable to create a virtual disk on the selected disk drives, because Lifecycle
Controller is not enabled.
Recommended
Response Action
To enable Lifecycle Controller, reboot the server. During server startup, press F2 to
enter System Setup. Go to iDRAC Settings -> Lifecycle Controller, select Enable,
and save the changes. Retry the operation after the server has restarted.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC069
Message Unable to complete the operation because the string length is less than the
minimum supported length.
Detailed
Description
Unable to complete the operation because the string length is less than the
minimum supported length.
Recommended
Response Action
Enter a string value that is greater than the minimum supported length and retry
the operation.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
RAC0690
Message The iDRAC Service Module is not installed on the operating system of the server.
1253