Reference Guide

Detailed
Description
RAID Controller Log data is being collected. This operation will take less than the
number of minutes identified in the message.
Recommended
Response Action
Do not log off from the application until the log data collection process is
completed.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
RAC0666
Message A RAID Controller Log is created.
Detailed
Description
A RAID Controller Log is created.
Recommended
Response Action
To export the Log report, click OK. To delete the report, click Cancel.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
RAC0667
Message This setting will be applied after the server has been turned off and turned on again.
This may result in loss of configuration and/or access to physical disk drive(s).
Detailed
Description
This setting will be applied after the server has been turned off and turned on again.
This may result in loss of configuration and/or access physical disk drive(s) or virtual
disk(s) being marked offline. This may also result in some disk(s) being identified as
foreign disks. Foreign physical disk drive(s) or virtual disk(s) can be imported or
cleared.
Recommended
Response Action
Press OK to continue.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0668
Message This setting will be applied during the next server restart. If the setting is not
compatible with the RAID Controller, then LED status indicators on all the
associated hard disk drives (HDDs) stop functioning.
1244