Reference Guide

No alerts are applicable for this message
RAC0604
Message System inventory may not be up-to-date because Collect System Inventory On
Restart (CSIOR) is disabled.
Detailed
Description
The system inventory may not be up-to-date because the Collect System
Inventory On Restart (CSIOR) feature is disabled. The CSIOR feature retrieves
detailed system inventory information during system startup and stores this
information on iDRAC.
Recommended
Response Action
Enable CSIOR, restart the system and retry the operation. To enable CSIOR, press
F2 (System Setup) during system startup, navigate to iDRAC Settings >Lifecycle
Controller, and select the Enabled option for Collect System Inventory on Restart.
Category Configuration (RAC = RAC Event)
Severity Severity 1 (Critical)
No alerts are applicable for this message
RAC0605
Message There are no jobs to be displayed.
Detailed
Description
There are no jobs to be displayed.
Recommended
Response Action
No response action is required.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0606
Message The network connection test operation was successful.
Detailed
Description
The selected network connection test operation was successful.
Recommended
Response Action
No response action is required.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
1224