Reference Guide

Detailed
Description
The country code is not entered in the correct format or does not exist. Refer to
ISO 3166 for the correct country code format.
Recommended
Response Action
Enter country code in the correct format as defined in ISO 3166. For example,
United States = US.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0500
Message There are no batteries to be displayed.
Detailed
Description
Batteries cannot be displayed. This error may occur if the host system is powered
off or there is a bad or disconnected cable for batteries connected to the
controller.
Recommended
Response Action
1. Check if the host system is powered off or shutdown. 2. Verify that the batteries
are connected properly.
Category Storage (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0501
Message There are no physical disks to be displayed.
Detailed
Description
Physical disks cannot be displayed. This error may occur if the host system is
powered off or the physical disks are removed. This may result in communication
loss while retrieving controller data.
Recommended
Response Action
1. Check if the host system is powered off or shutdown. 2. Check if the physical
disks are inserted into the enclosure or attached to the backplane. 3. There are no
out-of-band capable controllers detected.
Category Storage (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0502
Message There are no virtual disks to be displayed.
Detailed
Description
Virtual disks cannot be displayed. This error may occur if the host system is
powered off or there are no virtual disks created.
1212