Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
PWR8504
Message Chassis power button is pressed, but the button is disabled.
Detailed
Description
The chassis power button press is detected but the button has been disabled.
Recommended
Response Action
The chassis power button is disabled. To enable the chassis power button use the
CMC RACADM command line interface, CMC Web interface. Using the command
line, enter "racadm config -g cfgChassisPower -o cfgChassisPowerButtonEnable
1". Using the Web interface, click Chassis Overview > Power > Configuration. Clear
the Disable Chassis Power Button check box.
Category Audit (PWR = Power Usage)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
PWR8505
Message The Dynamic Power Supply Engagement feature was not successfully enabled.
Detailed
Description
The Dynamic Power Supply Engagement feature was not successfully enabled.
Recommended
Response Action
Restart the Chassis Management Controller and retry the operation. To restart the
Chassis Management Controller, using the WEB UI, go to Chassis Overview >
Power > Control, select the Reset CMC option, and then click Apply.
Category Audit (PWR = Power Usage)
Severity Severity 2 (Warning)
1137