Reference Guide

PWR8501
Message Successfully set Virtual Infrastructure Device power to arg1 WDC
Arguments arg1 = power reading
Detailed
Description
Power allocation succeeded for Virtual infrastructure.
Recommended
Response Action
No response action is required.
Category Audit (PWR = Power Usage)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
PWR8503
Message The current value of System Input Power Cap ( arg1 AC) is less than the upper limit
( arg2 AC).
Arguments arg1 = power value, arg2 = power value
Detailed
Description
This Information is provided to enable checking whether the powercap is lower
than the maximum supported powercap limit.
Recommended
Response Action
No response action is required.
Category Audit (PWR = Power Usage)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
1136