Reference Guide

Overview>Power>Configuration and then uncheck the Max Power Conservation
Mode field.
Category Audit (PWR = Power Usage)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
PWR2256
Message Unable to allocate power for servers to turn on because the Chassis Management
Controller (CMC) is initializing chassis infrastructure components.
Detailed
Description
The chassis infrastructure components are being initialized and are not ready to
grant power on permission to the servers.
Recommended
Response Action
Wait until the chassis infrastructure has been initialized and then retry the
operation. To check that the infrastructure is initialized, using the RACADM
command line utility run the command "racadm getmodinfo" and check that the
"pwrstate" field is on for the chassis component.
Category Audit (PWR = Power Usage)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
PWR2257
Message The target power allocation override is arg1 . The target power allocation (AC) is
arg2 Watts.
1127