Reference Guide

PSU8520
Message Enhanced Dynamic Power Supply Engagement (DPSE) is fully supported.
Detailed
Description
The Dynamic Power Supply Engagement feature is supported and fully operational.
Recommended
Response Action
No response action is required.
Category Audit (PSU = Power Supply)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
PSU8521
Message PSU arg1 exceeded upper temperature threshold and has been turned off.
Arguments arg1 = slotnum
Detailed
Description
The power supply unit (PSU) identified in the message was turned off because the
temperature exceeded the high temperature threshold in the unit.
Recommended
Response Action
Remove and reinsert the PSU or remove AC power and reapply power to the PSU
to get it functional again.
Category Audit (PSU = Power Supply)
Severity Severity 1 (Critical)
Trap/EventID 8329
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔* ✔* ✔* ✔*
CMC ✔ ✔* ✔* ✔*
1089