Reference Guide

Category Audit (PSU = Power Supply)
Severity Severity 2 (Warning)
Trap/EventID 8330
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔* ✔* ✔* ✔*
CMC ✔ ✔* ✔* ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔*
CMC ✔* ✔*
PSU8515
Message Unable to set the Enable Dynamic Power Supply Engagement attribute.
Detailed
Description
Unable to set the Enable Dynamic Power Supply Engagement attribute.
Recommended
Response Action
Do the following: 1) Retry the operation. 2) If the issue persists, review the tracelog
for more details. To retrieve the tracelog, in the CMC Web interface, go to
Troubleshooting > Diagnostics page and enter the "gettracelog" command, or use
RACADM "gettracelog" command. If the issue continues to persist, contact your
service provider and provide the tracelog.
Category Audit (PSU = Power Supply)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔*
CMC ✔ ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
PSU8516
Message Unable to set redundancy policy because PSU enumeration is in progress.
1086