Reference Guide

Recommended
Response Action
Do the following: 1) Check if the input voltage of all the PSUs are the same. 2) If the
input voltage of the PSU specified in the message is not the same, then remove the
unmatched PSU.
Category Audit (PSU = Power Supply)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
PSU8504
Message The Allow 110 VAC Operation overload risk is not acknowledged.
Detailed
Description
Selecting the Allow 110 VAC Operation involves potential risk that an overload can
occur. The overload risk was not acknowledged in the CMC Web interface when
the selection was made.
Recommended
Response Action
Select the Allow 110 VAC Operation and accept the subsequent dialog that
acknowledges the overload risk.
Category Audit (PSU = Power Supply)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
PSU8505
Message Unable to set the chassis redundancy policy to AC Redundancy.
1081