Reference Guide

PSU0800
Message Power Supply arg1 : Status = 0x arg2 , IOUT = 0x arg3 , VOUT= 0x arg4 , TEMP= 0x
arg5 , FAN = 0x arg6 , INPUT= 0x arg7
Arguments arg1 = PSU_name, arg2 = PSU_Status, arg3 = Output_Current, arg4 =
Output_Voltage, arg5 = Temp, arg6 = Fan, arg7 = Input
Detailed
Description
Lists the complete status of the power supply unit.
Recommended
Response Action
No response action is required.
Category System Health (PSU = Power Supply)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
PSU0801
Message Power Supply arg1 : CRC error detected
Arguments arg1 = PSU_Name
Detailed
Description
The Power Supply had a CRC error detected
Recommended
Response Action
Acquire the power supply firmware image and update the power supply indicated
in the message.
Category System Health (PSU = Power Supply)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
1061