Reference Guide

PST0134
Message Interrupt controller failed.
Detailed
Description
System BIOS detected a failure with the interrupt controller during system POST.
This exception occurred early in system power on, thus the system may not display
video. (BIOS POST Exception code 86)
Recommended
Response Action
Remove and reapply input power. If the problem persists, contact technical
support. Refer to the product documentation to choose a convenient contact
method.
Category System Health (PST = BIOS POST)
Severity Severity 1 (Critical)
Trap/EventID 2425
LCD Message Interrupt controller failed. Power cycle system
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC
PST0135
Message Timer refresh failed.
Detailed
Description
System BIOS detected a timer refresh failure during system POST. This exception
occurred early in system power on, thus the system may not display video. (BIOS
POST Exception code 87).
Recommended
Response Action
Remove and reapply input power. If the problem persists, contact technical
support. Refer to the product documentation to choose a convenient contact
method.
Category System Health (PST = BIOS POST)
Severity Severity 1 (Critical)
Trap/EventID 2425
LCD Message Timer refresh failed. Power cycle system
1028