Reference Guide

Event ID — 1401
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Informational
Cause Memory device status is unknown. The memory module may not be correctly
seated, wrongly configured, or has failed.
Event ID — 1402
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Informational
Cause Memory device status is normal. The memory device identified in the message has
returned to a normal state.
Event ID — 1403
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Warning
Cause A memory device correction rate exceeded an acceptable value. The memory
device status and possible memory module event cause information is provided.
Event ID — 1404
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Error
Cause A memory device correction rate exceeded an acceptable value, a memory spare
bank was activated, or a multi-bit ECC error occurred. The system continues to
function normally (except for a multi-bit error). Replace the memory module
identified in the message during the system’s next scheduled maintenance. Clear
48