Reference Guide

Description Line
Item
Action requested was: <Action>
Explanation Specifies the action that was requested, for example: Action requested was:
Reboot, shutdown OS first
Description Line
Item
Additional Details: <Additional details for the event>
Explanation Specifies additional details available for the hot plug event, for example: Memory
device: DIMM1_A Serial number: FFFF30B1
Description Line
Item
<Additional power supply status information>
Explanation Specifies information pertaining to the event, for example: Power supply input
AC is off, Power supply POK (power OK) signal is not normal,
Power supply is turned off
Description Line
Item
Chassis intrusion state: <Intrusion state>
Explanation Specifies whether the chassis intrusion state is Open or Closed. For example:
Chassis intrusion state: Open
Description Line
Item
Chassis location: <Name of chassis>
Explanation Specifies name of the chassis that generated the message, for example: Chassis
location: Main System Chassis
Description Line
Item
Configuration error type: <type of configuration error>
Explanation Specifies the type of configuration error that occurred, for example:
Configuration error type: Revision mismatch
Description Line
Item
Current sensor value (in Amps): <Reading>
Explanation Specifies the current sensor value in amps, for example: Current sensor value
(in Amps): 7.853
Description Line
Item
Date and time of action: <Date and time>
Explanation Specifies the date and time the action was performed, for example: Date and
time of action: Sat Jun 12 16:20:33 2004
Description Line
Item
Device location: <Location in chassis>
Explanation Specifies the location of the device in the specified chassis, for example: Device
location: Memory Card A
24