Server Administrator Version 8.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2015 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws.
Contents 1 Introduction......................................................................................................... 17 What’s New in this Release..................................................................................................................17 Alert Message Change History............................................................................................................ 17 Messages Not Described in This Guide.............................................................
Event ID — 1053............................................................................................................................ 33 Event ID — 1054............................................................................................................................ 33 Event ID — 1055............................................................................................................................ 34 Cooling Device Messages............................................................
Event ID — 1400............................................................................................................................ 47 Event ID — 1401............................................................................................................................ 48 Event ID — 1402............................................................................................................................48 Event ID — 1403.....................................................................
Event ID — 2048............................................................................................................................ 61 Event ID — 2049............................................................................................................................62 Event ID — 2050............................................................................................................................62 Event ID — 2051......................................................................
Event ID — 2101.............................................................................................................................78 Event ID — 2102............................................................................................................................ 78 Event ID — 2103............................................................................................................................ 79 Event ID — 2104....................................................................
Event ID — 2147............................................................................................................................ 96 Event ID — 2148............................................................................................................................ 96 Event ID — 2149............................................................................................................................ 96 Event ID — 2150....................................................................
Event ID — 2189...........................................................................................................................112 Event ID — 2190...........................................................................................................................113 Event ID — 2191........................................................................................................................... 113 Event ID — 2192......................................................................
Event ID — 2233.......................................................................................................................... 128 Event ID — 2234.......................................................................................................................... 128 Event ID — 2235.......................................................................................................................... 129 Event ID — 2236.......................................................................
Event ID — 2277.......................................................................................................................... 143 Event ID — 2278.......................................................................................................................... 144 Event ID — 2279.......................................................................................................................... 144 Event ID — 2280.......................................................................
Event ID — 2321.......................................................................................................................... 160 Event ID — 2322...........................................................................................................................161 Event ID — 2323...........................................................................................................................161 Event ID — 2324.......................................................................
Event ID — 2366.......................................................................................................................... 177 Event ID — 2367...........................................................................................................................177 Event ID — 2368.......................................................................................................................... 178 Event ID — 2369.......................................................................
Event ID — 2413.......................................................................................................................... 193 Event ID — 2414.......................................................................................................................... 193 Event ID — 2415.......................................................................................................................... 193 Event ID — 2416.......................................................................
Event ID — 2904......................................................................................................................... 208 Event ID — 2905......................................................................................................................... 208 Event ID — 2906......................................................................................................................... 209 Event ID — 2907..........................................................................
Battery Events................................................................................................................................... 243 Power And Performance Events...................................................................................................... 244 Entity Presence Events..................................................................................................................... 246 Miscellaneous Events...............................................................
1 Introduction OpenManage Server Administrator generates event messages stored primarily in the operating system or Server Administrator event logs and sometimes in Simple Network Management Protocol (SNMP) traps. This document describes the event messages that are created by Server Administrator version 8.2 and displayed in the Server Administrator alert log. Server Administrator creates events in response to sensor status changes and other monitored parameters.
Storage Management 4.3 Product Versions to which changes apply Storage Management 4.3.0 New Alerts 2699, 2700, 2701, 2702, 2703, 2704, 2705, 2874, 2875, 2876, 2900, 2901, 2902, 2903, 2904, 2905, 2906, 2907, 2908, 2909, 2910, 2911, 2912, 2913, 2914, 2915, 2916, 2917, 2918, 2919, 2920, 2921, 2922, 2923, 2924, 2930, 2931, 2932, 2933 Deleted Alerts None Modified Alerts None Server Administrator 7.3.0 Storage Management 4.2 Product Versions to which changes apply Storage Management 4.2.
Modified Alerts 2388, 2347, 2081 Storage Management 3.4 Product Versions to which changes apply Storage Management 3.4.0 New Alerts 2405, 2406, 2407, 2408, 2409, 2410, 2411, 2412, 2413, 2414, 2415, 2416, 2417, 2418 Server Administrator 6.4.0 NOTE: The CacheCade feature is available from calendar year 2011. Deleted Alerts None Modified Alerts None Storage Management 3.3 Product Versions to which changes apply Storage Management 3.3.
Understanding Event Messages Add your section content here.This section describes the various types of event messages generated by the Server Administrator. When an event occurs on your system, Server Administrator sends information about one of the following event types to the systems management console: Table 2. Understanding Event Messages Icon Alert Severity Component Status OK /Normal / Informational An event that describes the successful operation of a unit.
• AC Power Cord Sensor — Monitors the presence of AC power for an AC power cord. • Hardware Log Sensor — Monitors the size of a hardware log. • Processor Sensor — Monitors the processor status in the system. • Pluggable Device Sensor — Monitors the addition, removal, or configuration errors for some pluggable devices, such as memory cards. • Battery Sensor — Monitors the status of one or more batteries in the system.
NOTE: The default name of the operating system log file is /var/log/messages, and you can view the operating system log file using a text editor such as vi or emacs. The Server Administrator event log file is named dcsys.xml,where xx is either 32 or 64 bit depending on the operating system.
Feb 6 14:20:51 server01 Server Administrator: Instrumentation Service EventID: 1000 Server Administrator starting Feb 6 14:20:51 server01 Server Administrator: Instrumentation Service EventID: 1001 Server Administrator startup complete Feb 6 14:21:21 server01 Server Administrator: Instrumentation Service EventID: 1254Chassis intrusion detected Sensor location: Main chassis intrusion Chassis location: Main System Chassis Previous state was: OK (Normal) Chassis intrusion state: Open Feb 6 14:21:51 server01 Se
Description Line Item Action requested was: Explanation Specifies the action that was requested, for example: Action requested was: Reboot, shutdown OS first Description Line Item Additional Details: Explanation Specifies additional details available for the hot plug event, for example: Memory device: DIMM1_A Serial number: FFFF30B1 Description Line Item Explanation Specifies information pertaining to the eve
Description Line Item Discrete current state: Explanation Specifies the state of the current sensor, for example: Discrete current state: Good Description Line Item Discrete temperature state: Explanation Specifies the state of the temperature sensor, for example: Discrete temperature state: Good Description Line Item Discrete voltage state: Explanation Specifies the state of the voltage sensor, for example: Discrete voltage state: Good Description Line Item Fan sensor v
Description Line Item Possible memory module event cause: Explanation Specifies a list of possible causes for the memory module event, for example: Possible memory module event cause: Single bit warning error rate exceeded Single bit error logging disabled Description Line Item Power Supply type: Explanation Specifies the type of power supply, for example: Power Supply type: VRM Description Line Item Previous redundancy state was: Explanation Specif
Description Line Item Temperature sensor value: Explanation Specifies the temperature in degrees Celsius, for example: Temperature sensor value (in degrees Celsius): 30 Description Line Item Voltage sensor value (in Volts): Explanation Specifies the voltage sensor value in volts, for example: Voltage sensor value (in Volts): 1.
Server Management Messages 2 The following tables lists in numerical order each event ID and its corresponding description, along with its severity and cause. NOTE: For corrective actions, see the appropriate documentation. Server Administrator General Messages The messages below indicate that certain alert systems are up and working. Event ID — 0000 Description Log was cleared Severity Information Cause User cleared the log from Server Administrator.
Cause Server Administrator completed initialization. Event ID — 1002 Description A system BIOS update has been scheduled for the next reboot Severity Information Cause The user has chosen to update the flash basic input/output system (BIOS). Event ID – 1003 Description A previously scheduled system BIOS update has been canceled Severity Information Cause The user decides to cancel the flash BIOS update, or an error occurs during the flash.
Event ID — 1007 Description User initiated host system control action Action requested was: Severity Information Cause User requested a host system control action to reboot, power off, or power cycle the system. Alternatively, the user had indicated protective measures to be initiated in the event of a thermal shutdown. Event ID — 1008 Description Systems Management Data Manager Started Severity Information Cause Systems Management Data Manager services were started.
Event ID — 1013 Description System Peak Power detected new peak value Peak value (in Watts): Severity Information Cause The system peak power sensor detected a new peak value in power consumption. The new peak value in Watts is provided.
If sensor type is not discrete: Temperature sensor value (in degrees Celsius): If sensor type is discrete: Discrete temperature state: Severity Error Cause A temperature sensor on the backplane board, system board, or the carrier in the specified system failed. The sensor location, chassis location, previous state, and temperature sensor value are provided.
Cause A temperature sensor on the backplane board, system board, or drive carrier in the specified system returned to a valid range after crossing a failure threshold. The sensor location, chassis location, previous state, and temperature sensor value are provided.
Event ID — 1055 Description Temperature sensor detected a non-recoverable value Sensor location: Chassis location: Previous state was: If sensor type is not discrete: Temperature sensor value (in degrees Celsius): If sensor type is discrete: Discrete temperature state: Severity Error Cause A temperature sensor on the backplane board, system board, or drive carrier in the specified system detected an error from which it cannot recover.
Fan sensor value: Severity Error Cause A fan sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state, and a nominal fan sensor value information is provided.
Severity Error Cause A fan sensor in the specified system detected the failure of one or more fans. The sensor location, chassis location, previous state, and fan sensor value information is provided. Event ID — 1105 Description Fan sensor detected a non-recoverable value Sensor location: Chassis location: Previous state was: Fan sensor value: Severity Error Cause A fan sensor detected an error from which it cannot recover.
Event ID — 1151 Description Voltage sensor value unknown Sensor location: Chassis location: Previous state was: If sensor type is not discrete: Voltage sensor value (in Volts): If sensor type is discrete: Discrete voltage state: Severity Warning Cause A voltage sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state, and a nominal voltage sensor value are provided.
Previous state was: If sensor type is not discrete: Voltage sensor value (in Volts): If sensor type is discrete: Discrete voltage state: Severity Warning Cause A voltage sensor in the specified system exceeded its warning threshold. The sensor location, chassis location, previous state, and voltage sensor value information is provided.
If sensor type is discrete: Discrete voltage state: Severity Error Cause A voltage sensor in the specified system detected an error from which it cannot recover. The sensor location, chassis location, previous state, and voltage sensor value information is provided. Current Sensor Messages The current sensors listed measure the amount of current (in amperes) that is traversing critical components.
Current sensor value (in Amps): OR Current sensor value (in Watts): If sensor type is discrete: Discrete voltage state: Severity Warning Cause A current sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state, and a nominal current sensor value information is provided.
Current sensor value (in Watts): If sensor type is discrete: Discrete voltage state: Severity Warning Cause A current sensor in the specified system exceeded its warning threshold. The sensor location, chassis location, previous state, and current sensor value are provided.
If sensor type is discrete: Discrete voltage state: Severity Error Cause A current sensor in the specified system detected an error from which it cannot recover. The sensor location, chassis location, previous state, and current sensor value are provided. Chassis Intrusion Messages The chassis intrusion messages listed are a security measure. Chassis intrusion means that someone is opening the cover to a system’s chassis. Alerts are sent to prevent unauthorized removal of parts from a chassis.
Event ID — 1254 Description Chassis intrusion detected Sensor location: Chassis location: Previous state was: Chassis intrusion state: Severity Critical Cause A chassis intrusion sensor in the specified system detected that the system cover was opened while the system was operating. The sensor location, chassis location, previous state, and chassis intrusion state information is provided.
Chassis location: Previous redundancy state was: Severity Warning Cause A redundancy sensor in the specified system could not obtain a reading. The redundancy unit location, chassis location, previous redundancy state, and the number of devices required for full redundancy are provided.
redundancy unit location, chassis location, previous redundancy state, and the number of devices required for full redundancy information is provided. Event ID — 1305 Description Redundancy degraded Redundancy unit: Chassis location: Previous redundancy state was: Severity Warning Cause A redundancy sensor in the specified system detected that one of the components of the redundancy unit has failed but the unit is still redundant.
If in configuration error state: Configuration error type: Severity Warning Cause A power supply sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state, power supply type, additional power supply status, and configuration error type information are provided.
supply type, additional power supply status, and configuration error type information are provided.
Event ID — 1401 Description Memory device status is Memory device location: Possible memory module event cause: Severity Informational Cause Memory device status is unknown. The memory module may not be correctly seated, wrongly configured, or has failed.
the memory error on multi-bit ECC error. The memory device status and possible memory module event cause information is provided. Event ID — 1405 Description Memory device status is Memory device location: Possible memory module event cause: Severity Informational Cause Memory device status is nonrecoverable. The memory module failed because of an irrecoverable error.
Log type: Severity Information Cause The hardware log on the specified system is no longer near or at its capacity, usually as the result of clearing the log. The log type information is provided. Event ID — 1553 Description Log size is near capacity Log type: Severity Warning Cause The size of a hardware log on the specified system is near or at the capacity of the hardware log. The log type information is provided.
Previous state was: Processor sensor status: Severity Warning Cause A processor sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state and processor sensor status information is provided.
Processor sensor status: Severity Error Cause A processor sensor in the specified system is disabled, has a configuration error, or experienced a thermal trip. The sensor location, chassis location, previous state and processor sensor status are provided. Pluggable Device Messages The pluggable device messages listed provides status and error information when some devices, such as memory cards, are added or removed.
Cause A device was removed from the specified system. The device location, chassis location, and additional event details, if available, are provided. Event ID — 1653 Description Device configuration error detected Device location: Chassis Location: Additional details: Severity Error Cause A configuration error was detected for a pluggable device in the specified system.
Cause A battery sensor in the specified system could not retrieve a reading. The sensor location, chassis location, previous state, and battery sensor status information is provided.
Cause A battery sensor in the specified system detected that a battery has failed. The sensor location, chassis location, previous state, and battery sensor status information is provided. Event ID — 1705 Description Battery sensor detected a non-recoverable value Sensor location: Chassis Location: Previous state was: Battery sensor status: Severity Error Cause A battery sensor in the specified system could not retrieve a value.
Previous state was: SD card device type: SD card state: Severity Information Cause An SD card device sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state, and SD card device type information is provided. The SD card state is provided if an SD card is present in the SD card device.
Event ID — 1754 Description SD card device detected a failure Sensor location: Chassis Location: Previous state was: SD card device type: SD card state: Severity Error Cause An SD card device sensor in the specified system detected an error. The sensor location, chassis location, previous state, and SD card device type information is provided.
3 Storage Management Message Reference The Server Administrator Storage Management’s alert or event management features let you monitor the health of storage resources such as controllers, enclosures, physical disks, and virtual disks. Alert Monitoring and Logging The Storage Management Service performs alert monitoring and logging. By default, the Storage Management service starts when the managed system starts up. If you stop the Storage Management Service, then alert monitoring and logging stops.
Table 3.
Storage Object Message Variables For example, 2057 Virtual disk degraded: Virtual Disk 11 (Virtual Disk 11) Controller 1 (PERC 5/E Adapter) NOTE: The virtual disk and controller names are not always displayed.
Storage Object Message Variables For example, 2121 Device returned to normal: EMM 1, Controller 1, Connector 0, Target ID 6 Message Format: EMM X Controller A, Connector B, Enclosure C SAS EMM For example, 2121 Device returned to normal: EMM 1, Controller 1, Connector 0, Enclosure 2 Alert Descriptions and Corrective Actions The following sections describe alerts generated by the RAID or SCSI controllers supported by Storage Management.
Event ID — 2049 Description Physical disk removed. Severity Warning / Non-critical Cause and Action Cause: A physical disk has been removed from the disk group. This alert can also be caused by loose or defective cables or by problems with the enclosure. Action: If a physical disk was removed from the disk group, either replace the disk or restore the original disk. On some controllers, a removed disk has a red X for its status.
Severity Warning / Non-critical Cause and Action Cause: A physical disk has reported an error condition and may be degraded. The physical disk may have reported the error condition in response to a SMART Trip (Predictive Failure). Action: Replace the degraded physical disk. You can identify which disk is degraded by locating the disk that has a Yellow Triangle for its status. Perform a rescan after replacing the disk.
SNMP Trap Numbers 1201 Event ID — 2054 Description Virtual disk deleted. Severity Informational Cause and Action Cause: A virtual disk has been deleted. Performing a Reset Configuration may detect that a virtual disk has been deleted. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2080 SNMP Trap Numbers 1201 Event ID — 2055 Description Virtual disk configuration changed.
Action: Create a new virtual disk and restore from a backup. Related Alert Information Clear Alert Number: None Related Alert Number: 2048, 2049, 2050, 2076, 2079, 2081, 2129, 2346 Local Response Agent (LRA) Number: 2081 SNMP Trap Numbers 1204 Event ID — 2057 Description Virtual disk degraded. Severity Warning / Non-critical Cause and Action Cause 1: This alert message occurs when a physical disk included in a redundant virtual disk fails.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2059 Description Virtual disk format started. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Action: None Related Alert Information Clear Alert Number: 2088 Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2062 Description Physical disk initialization started. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: 2091 Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2065 Description Physical disk rebuild started. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Event ID — 2070 Description Virtual disk initialization cancelled. Severity OK / Normal / Informational Cause and Action Cause: The virtual disk initialization cancelled because a physical disk included in the virtual disk has failed or because a user cancelled the virtual disk initialization. Action: If a physical disk failed, then replace the physical disk. You can identify which disk has failed by locating the disk that has a red “X” for its status. Perform a rescan after replacing the disk.
Related Alert Number: 2060 Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2076 Description Virtual disk Check Consistency failed. Severity Critical / Failure / Error Cause and Action Cause: AA physical disk included in the virtual disk failed or there is an error in the parity information. A failed physical disk can cause errors in parity information. Action: Replace the failed physical disk.
Severity Critical / Failure / Error Cause and Action Cause: A physical disk included in the virtual disk has failed or a user has cancelled the initialization. Action: If a physical disk has failed, then replace the physical disk Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2081 SNMP Trap Numbers 1204 Event ID — 2080 Description Physical disk initialization failed.
Related Alert Information • If the file backup fails, try to restore the failed file from a previous backup. • When the backup with the Verify option is complete without any errors, delete the Virtual Disk. • Recreate a new Virtual Disk with new drives. • Restore the data from backup. Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2081 SNMP Trap Numbers 1204 Event ID — 2082 Description Virtual disk rebuild failed.
Local Response Agent (LRA) Number: 2071 SNMP Trap Numbers 904 Event ID — 2085 Description Virtual disk check consistency completed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: Alert 2085 is a clear alert for alert 2058. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2086 Description Virtual disk format completed.
Related Alert Information Clear Alert Number: None Related Alert Number: 2060 Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2088 Description Virtual disk initialization completed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: Alert 2088 is a clear alert for alerts 2061 and 2136.
Action: None Related Alert Information Clear Alert Number: Alert 2090 is a clear alert for alert 2063. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2091 Description Virtual disk rebuild completed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: Alert 2091 is a clear alert for alert 2064.
Cause and Action Cause: The physical disk is predicted to fail. Many physical disks contain Self Monitoring Analysis and Reporting Technology (SMART). When enabled, SMART monitors the health of the disk based on indications such as the number of write operations that have been performed on the disk. Action: Replace the physical disk. Even though the disk may not have failed yet, it is strongly recommended that you replace the disk.
Cause and Action Cause: A user has assigned a physical disk as a global hot spare. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: 2277 Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2099 Description Global hot spare unassigned.
Action: Check for factors that may cause overheating. For example, verify that the enclosure fan is working. You should also check the thermostat settings and examine whether the enclosure is located near a heat source. Make sure the enclosure has enough ventilation and that the room temperature is not too hot. See the physical disk enclosure documentation for more diagnostic information.
Local Response Agent (LRA) Number: 2091 SNMP Trap Numbers 1054 Event ID — 2103 Description Temperature dropped below the minimum failure threshold. Severity Critical / Failure / Error Cause and Action Cause: The physical disk enclosure is too cool. Action: Check if the thermostat setting is too low and if the room temperature is too cool.
Related Alert Information Clear Alert Number: Alert 2105 is a clear alert for alert 2104. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2106 Description SMART FPT exceeded. Severity Warning / Non-critical Cause and Action Cause: A disk on the specified controller has received a SMART alert (predictive failure) indicating that the disk is likely to fail in the near future. Action: Replace the disk that has received the SMART alert.
SNMP Trap Numbers 904 Event ID — 2108 Description SMART warning. Severity Warning / Non-critical Cause and Action Cause: A disk has received a SMART alert (predictive failure). The disk is likely to fail in the near future. Action: Replace the disk that has received the SMART alert. If the physical disk is a member of a non-redundant virtual disk, then back up the data before replacing the disk.
CAUTION: Removing a physical disk that is included in a non-redundant virtual disk causes the virtual disk to fail and may cause data loss. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2070 SNMP Trap Numbers 903 Event ID — 2110 Description SMART warning degraded. Severity Warning / Non-critical Cause and Action Cause: A disk is degraded and has received a SMART alert (predictive failure).
SNMP Trap Numbers 903 Event ID — 2112 Description Enclosure was shut down. Severity Critical / Failure / Error Cause and Action Cause: The physical disk enclosure is either hotter or cooler than the maximum or minimum allowable temperature range. Action: Check for factors that may cause overheating or excessive cooling. For example, verify that the enclosure fan is working. You should also check the thermostat settings and examine whether the enclosure is located near a heat source.
Cause and Action Cause: The check consistency operation on a virtual disk has resumed processing after being paused by a user. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: Alert 2115 is a clear alert for alert 2114. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2116 Description A virtual disk and its mirror have been split.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2118 Description Change write policy. Severity OK / Normal / Informational Cause and Action Cause: A user has changed the write policy for a virtual disk. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2120 Description Enclosure firmware mismatch.
Cause and Action Cause: A device that was previously in an error state has returned to a normal state. For example, if an enclosure became too hot and subsequently cooled down, you may receive this alert. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: Alert 2121 is a clear alert for alert 2048.
Cause and Action Cause: A virtual disk or an enclosure has lost data redundancy. In the case of a virtual disk, one or more physical disks included in the virtual disk have failed. Due to the failed physical disk or disks, the virtual disk is no longer maintaining redundant (mirrored or parity) data. The failure of an additional physical disk results in lost data. In the case of an enclosure, more than one enclosure component has failed.
Event ID — 2125 Description Controller cache preserved for missing or offline virtual disk. Severity Warning / Non-critical Cause and Action Cause: Virtual disk controller was disconnected, during I/O operation. Action: Import foreign disks, if any. Check if the enclosure containing the virtual disk is disconnected from the controller.
Severity OK / Normal / Informational Cause and Action Cause: BGI of a virtual disk has started. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: 2130 Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2128 Description BGI cancelled. Severity OK / Normal / Informational Cause and Action Cause: BGI of a virtual disk has been cancelled. A user or the firmware may have stopped BGI.
Event ID — 2130 Description BGI completed. Severity OK / Normal / Informational Cause and Action Cause: BGI of a virtual disk has completed. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: Alert 2130 is a clear alert for alert 2127. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2131 Description Firmware version mismatch.
Related Alert Number: None Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event ID — 2135 Description Array Manager is installed on the system. NOTE: This is not supported on Server Administrator version 6.0.1. Severity Warning / Non-critical Cause and Action Cause: Storage Management has been installed on a system that has an Array Manager installation. Action: Installing Storage Management and Array Manager on the same system is not a supported configuration.
Event ID — 2137 Description Communication time-out. Severity Warning / Non-critical Cause and Action Cause: The controller is unable to communicate with an enclosure. There are several reasons why communication may be lost. For example, there may be a bad or loose cable. An unusual amount of I/O may also interrupt communication with the enclosure. In addition, communication loss may be caused by software, hardware, or firmware problems, bad or failed power supplies, and enclosure shutdown.
Event ID — 2139 Description Enclosure alarm disabled. Severity OK / Normal / Informational Cause and Action Cause: A user has disabled the enclosure alarm. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 851 Event ID — 2140 Description Dead disk segments restored.
enclosure has enough ventilation and that the room temperature is not too hot. See the physical disk enclosure documentation for more diagnostic information. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2142 Description Controller rebuild rate has changed. Severity OK / Normal / Informational Cause and Action Cause: A user has changed the controller rebuild rate.
Event ID — 2144 Description Controller alarm disabled. Severity OK / Normal / Informational Cause and Action Cause: A user has disabled the controller alarm. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2145 Description Controller battery low.
Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event ID — 2147 Description Bad block sense error. Severity Warning / Non-critical Cause and Action Cause: A portion of a physical disk is damaged. Action: See the Server Administrator Storage Management online help for more information. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event ID — 2148 Description Bad block medium error.
Action: See the Server Administrator Storage Management online help for more information. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event ID — 2150 Description Bad block extended medium error. Severity Warning / Non-critical Cause and Action Cause: A portion of a physical disk is damaged. Action: See the Server Administrator Storage Management online help for more information.
Event ID — 2152 Description Enclosure asset name changed. Severity OK / Normal / Informational Cause and Action Cause: A user has changed the enclosure asset name. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 851 Event ID — 2153 Description Enclosure service tag changed.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 1051 Event ID — 2155 Description Minimum temperature probe warning threshold value changed. Severity OK / Normal / Informational Cause and Action Cause: A user has changed the value for the minimum temperature probe warning threshold. This alert is for informational purposes.
Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2158 Description Physical disk online. Severity OK / Normal / Informational Cause and Action Cause: An offline physical disk has been made online. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: Alert 2158 is a clear alert for alert 2050.
SNMP Trap Numbers 1201 Event ID — 2160 Description Dedicated hot spare assigned. Severity OK / Normal / Informational Cause and Action Cause: A user has assigned a physical disk as a dedicated hot spare to a virtual disk. This alert is provided for informational purposes. Action: None Related Alert Information Clear Alert Number: 2161 Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2161 Description Dedicated hot spare unassigned.
Event ID — 2162 Description Communication regained. Severity OK / Normal / Informational Cause and Action Cause: Communication with an enclosure has been restored. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: Alert 2162 is a clear alert for alerts 2137 and 2292. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 851 Event ID — 2163 Description Rebuild completed with errors.
Action: See the Readme file for driver and firmware requirements. In particular, if Storage Management experiences performance problems, you should verify that you have the minimum supported versions of the drivers and firmware installed. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 101 Event ID — 2165 Description The RAID controller firmware and driver validation was not performed.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event ID — 2167 Description The current kernel version and the non-RAID SCSI driver version are older than the minimum required levels. See readme.txt for a list of validated kernel and driver versions. Severity Warning / Non-critical Cause and Action Cause: The version of the kernel and the driver do not meet the minimum requirements.
Local Response Agent (LRA) Number: 2050 SNMP Trap Numbers 103 Event ID — 2169 Description The controller battery needs to be replaced. Severity Critical / Failure / Error Cause and Action Cause: The controller battery cannot be recharged. The battery may be old or it may have been already recharged the maximum number of times. In addition, the battery charger may not be working. Action: Replace the battery pack.
Action: If this alert was generated due to a battery recharge, the situation is corrected when the recharge is complete. You should also check if the room temperature is normal and that the system components are functioning properly. Related Alert Information Clear Alert Number: 2172 Related Alert Number: None Local Response Agent (LRA) Number: 2100 SNMP Trap Numbers 1153 Event ID — 2172 Description The controller battery temperature is normal.
Event ID — 2174 Description The controller battery has been removed. Severity Warning / Non-critical Cause and Action Cause: The controller cannot communicate with the battery. The battery may be removed, or the contact point between the controller and the battery may be burnt or corroded. Action: Replace the battery if it has been removed. If the contact point between the battery and the controller is burnt or corroded, you must replace either the battery or the controller, or both.
Related Alert Information Clear Alert Number: 2177 Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2177 Description The controller battery Learn cycle has completed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: Alert 2177 is a clear alert for alert 2176.
Event ID — 2179 Description The controller battery Learn cycle has been postponed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2180 Description The controller battery Learn cycle starts in % 1 days.
Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2182 Description An invalid SAS configuration has been detected. Severity Critical / Failure / Error Cause and Action Cause: The controller and attached enclosures are not cabled correctly. Action: See the hardware documentation for information on correct cabling configurations.
Action: None Related Alert Information Clear Alert Number: None Related Alert Number: 2060 Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2185 Description Physical disk Replace Member Operation stopped for spare. Severity Warning / Non-critical Cause and Action Cause: This alert is provided for informational purposes.
Event ID — 2187 Description Single-bit ECC error limit exceeded on the controller DIMM. Severity Warning / Non-critical Cause and Action Cause: The system memory is malfunctioning. Action: Contact technical support to replace the controller memory. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event ID — 2188 Description The controller write policy has been changed to Write Through.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2190 Description The controller has detected a hot-add of an enclosure. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Severity Informational Cause and Action Cause: The virtual disk Check Consistency has identified errors and made corrections. For example, the Check Consistency may have encountered a bad disk block and remapped the disk block to restore data consistency. This alert is for informational purposes. Action: None. As a precaution, monitor the alert log for other errors related to this virtual disk. If problems persist, contact Technical Support.
SNMP Trap Numbers 1201 Event ID — 2195 Description Dedicated hot spare assigned. Physical disk % 1 Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: 2196 Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2196 Description Dedicated hot spare unassigned.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 903 Event ID — 2198 Description The physical disk is too small to be used for Replace member operation. Severity Warning Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 903 Event ID — 2199 Description The virtual disk cache policy has changed.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 903 Event ID — 2201 Description A global hot spare failed. Severity Warning/ Non-critical Cause and Action Cause: The controller is not able to communicate with a disk that is assigned as a dedicated hot spare. The disk may have been removed. There may also be a bad or loose cable. Action: Check if the disk is healthy and that it has not been removed.
Event ID — 2203 Description A dedicated hot spare failed. Severity Warning/ Non-critical Cause and Action Cause: The controller is unable to communicate with a disk that is assigned as a dedicated hot spare. The disk may have failed or been removed. There may also be a bad or loose cable. Action: Check if the disk is healthy and that it has not been removed. Check the cables. If necessary, replace the disk and reassign the hot spare.
Related Alert Information Clear Alert Number: None Related Alert Number: 2098, 2161, 2196 Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2206 Description The only hot spare available is a SATA disk. SATA disks cannot replace SAS disks. Severity Warning / Non-critical Cause and Action Cause: The only physical disk available to be assigned as a hot spare is using SATA technology. The physical disks in the virtual disk are using SAS technology.
Event ID — 2210 Description Battery requires reconditioning. Initiate the battery learn cycle. Severity Warning / Non-critical Cause and Action Cause: Battery is in warn only mode and requires reconditioning. Action: Initiate the battery learn cycle. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1153 Event ID — 2211 Description The physical disk is not supported.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2213 Description Recharge count maximum exceeded. Severity Warning / Non-critical Cause and Action Cause: The battery has been recharged more times than the battery recharge limit allows. Action: Replace the battery pack. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2100 SNMP Trap Numbers 1153 Event ID — 2214 Description Battery charge in progress.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2216 Description The battery learn mode has changed to auto. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Action: You should change at least one controller property and run the command again. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2219 Description Abort Check Consistency on Error, Replace Member Operation, Auto Replace Member Operation on Predictive Failure and Loadbalance changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Event ID — 2221 Description Auto Replace Member Operation on Predictive Failure, Abort CC on Error and Loadbalance changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: Change at least one controller property and run the command again.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2224 Description Replace Member Operation and Loadbalance changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: Change at least one controller property and run the command again.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2227 Description Abort Check Consistency on Error, Replace Member Operation and Auto Replace Member Operation on Predictive Failure changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: Change at least one controller property and run the command again.
Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: Change at least one controller property and run the command again. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2230 Description Auto Replace Member Operation on Predictive Failure changed.
Event ID — 2232 Description The controller alarm is silenced. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2233 Description The Background initialization (BGI) rate has changed.
SNMP Trap Numbers 751 Event ID — 2235 Description The Check Consistency rate has changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2236 Description Replace Member Operation modified.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2238 Description The controller debug log file has been exported. Severity OK / Normal / Informational Cause and Action Cause: The user has attempted to export the controller debug log. This alert is for informational purposes.
Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2241 Description The Patrol Read mode has changed. Severity OK / Normal / Informational Cause and Action Cause: The controller has changed the patrol read mode. This alert is for informational purposes.
Severity OK / Normal / Informational Cause and Action Cause: The controller has stopped the Patrol Read operation. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: Alert 2243 is a clear alert for alert 2242. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2244 Description A virtual disk blink has been initiated.
Event ID — 2246 Description Warning / Non-critical Severity OK / Normal / Informational Cause and Action Cause: The temperature of the battery is high. This maybe due to the battery being charged. Action: As the charge weakens, the charger should automatically recharge the battery. If the battery has reached its recharge limit, replace the battery pack. Monitor the battery to make sure that it recharges successfully.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2249 Description The physical disk Clear operation has started. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2250 Description Redundant Path is broken.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2252 Description The physical disk blink has ceased. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2255 Description The physical disk has been started. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Severity Warning /Non-critical Cause and Action Cause: I/O interrupted for a virtual disk which is connected to the controller. Action: Check for foreign configuration and import if any. Check for cable fault. Recover any virtual disk lost by the controller. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 753 Event ID — 2259 Description An enclosure blink operation has initiated.
Event ID — 2261 Description A global rescan has initiated. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2262 Description SMART thermal shutdown is enabled. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
SNMP Trap Numbers 101 Event ID — 2264 Description A device is missing. Severity Warning / Non-critical Cause and Action Cause: The controller cannot communicate with a device. The device may be removed. There may also be a bad or loose cable. Action: Check if the device is in and not removed. If it is in, check the cables. Also check the connection to the controller battery and the battery health. A battery with a weak or depleted charge may cause this alert.
Severity OK / Normal / Informational Cause and Action Cause: The %1 indicates a substitution variable. The text for this substitution variable is generated by the controller and is displayed with the alert in the alert log. This text can vary depending on the situation. This alert is for informational purposes.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2051 SNMP Trap Numbers 104 Event ID — 2269 Description The physical disk Clear operation has completed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Event ID — 2271 Description The Patrol Read encountered a media error. Severity OK / Normal / Informational Cause and Action Cause: The Patrol Read task has encountered an error such as a bad disk block that cannot be remapped. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2272 Description Patrol Read found an uncorrectable media error.
Action: Back up your data. If you are able to back up the data successfully, initialize the disk and restore from the back up. Related Alert Information Clear Alert Number: None Related Alert Number: 2095, 2350 Local Response Agent (LRA) Number: 2071 SNMP Trap Numbers 904 Event ID — 2274 Description The physical disk rebuild has resumed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Severity Warning / Non-critical Cause and Action Cause: The global hot spare is not large enough to protect all virtual disks that reside on the controller. Action: Assign a larger disk as the global hot spare. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2070 SNMP Trap Numbers 903 Event ID — 2278 Description The controller battery charge level is below a normal threshold.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2280 Description A disk media error has been corrected. Severity OK / Normal / Informational Cause and Action Cause: A disk media error was detected while the controller was completing a background task. A bad disk block was identified. The disk block has been remapped. Action: Consider replacing the disk. If you receive this alert frequently, be sure to replace the disk. You should also routinely back up your data.
Cause and Action Cause: The controller firmware attempted a SMART polling on the hot spare but was unable to complete it. The controller has lost communication with the hot spare. Action: Check the health of the disk assigned as a hot spare. You may need to replace the disk and reassign the hot spare. Make sure the cables are attached securely. See the Server Administrator Storage Management User’s Guide, for more information on checking the cables.
Related Alert Number: None Local Response Agent (LRA) Number: 2071 SNMP Trap Numbers 901 Event ID — 2285 Description A disk media error was corrected during recovery. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Action: None Related Alert Information Clear Alert Number: None Related Alert Number: 2384 Local Response Agent (LRA) Number: None SNMP Trap Numbers 101 Event ID — 2288 Description The patrol read has resumed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
SNMP Trap Numbers 754 Event ID — 2290 Description Single-bit ECC error on controller DIMM. Severity Warning / Non-critical Cause and Action Cause: An error involving a single bit has been encountered during a read or write operation. The error correction algorithm has corrected this error.
Related Alert Number: None Local Response Agent (LRA) Number: 2091 SNMP Trap Numbers 854 Event ID — 2293 Description The EMM has failed. Severity Critical / Failure / Error Cause and Action Cause: The failure may be caused by a loss of power to the EMM. The EMM self test may also have identified a failure. There could also be a firmware problem or a multi-bit error. Action: Replace the EMM. See the hardware documentation for information on replacing the EMM.
Cause and Action Cause: A device has been removed and the system is no longer functioning in optimal condition. Action: Replace the device. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2091 SNMP Trap Numbers 854 Event ID — 2296 Description An EMM has been inserted. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Event ID — 2298 Description The enclosure has a bad sensor %1. Severity Warning / Non-critical Cause and Action Cause: The enclosure has a bad sensor. The enclosure sensors monitor the fan speeds, temperature probes, and so on. The % indicates a substitution variable. The text for this substitution variable is displayed with the alerts in the alert log and can vary depending on the situation. Action: See the hardware documentation for more information.
Action: Power down all enclosures attached to the system and reboot the system. If the problem persists, upgrade the firmware to the latest supported version. You can download the most current version of the driver and firmware from the support site. Make sure the cable configuration is valid. See the hardware documentation for valid cabling configurations.
SNMP Trap Numbers 854 Event ID — 2303 Description The enclosure cannot support both SAS and SATA physical disks. Physical disks may be disabled. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 851 Event ID — 2304 Description An attempt to hot plug an EMM has been detected.
rebuild does not start automatically after you have inserted a suitable physical disk, then run the Rebuild task. See the Server Administrator Storage Management User’s Guide for more information. Related Alert Information Clear Alert Number: None Related Alert Number: 2326 Local Response Agent (LRA) Number: 2070 SNMP Trap Numbers 903 Event ID — 2306 Description Bad block table is 80% full.
Related Alert Information Clear Alert Number: None Related Alert Number: 2048 Local Response Agent (LRA) Number: 2071 SNMP Trap Numbers 904 Event ID — 2309 Description A physical disk is incompatible. Severity Warning / Non-critical Cause and Action Cause: You have attempted to replace a disk with another disk that is using an incompatible technology. For example, you may have replaced one side of a mirror with a SAS disk when the other side of the mirror is using SATA technology.
Event ID — 2311 Description The firmware on the EMMs is not the same version. EMM0 %1 EMM1 %2. Severity Warning / Non-critical Cause and Action Cause: The firmware on the EMM modules is not the same version. It is required that both modules have the same version of the firmware. This alert may be caused if you attempt to insert an EMM module that has a different firmware version than an existing module. The %1 and %2 indicate a substitution variable.
Related Alert Information Clear Alert Number: 2323 Related Alert Number: 2122, 2333 Local Response Agent (LRA) Number: 2090 SNMP Trap Numbers 1003 Event ID — 2314 Description The initialization sequence of SAS components failed during system startup. SAS management and monitoring is not possible. Severity Critical / Failure / Error Cause and Action Cause: Storage Management is unable to monitor or manage SAS devices. Action: Reboot the system.
Event ID — 2316 Description Diagnostic message %1 Severity Critical / Failure / Error Cause and Action Cause: A diagnostics test failed. The %1 indicates a substitution variable. The text for this substitution variable is generated by the utility that ran the diagnostics and is displayed with the alert in the alert log. This text can vary depending on the situation.
Related Alert Information Clear Alert Number: 753 Related Alert Number: 2320 Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event Id — 2320 Description Single-bit ECC error. The DIMM is critically degraded. Severity Critical / Failure / Error Cause and Action Cause: The DIMM is malfunctioning. Data loss or data corruption may be imminent. Action: Replace the DIMM immediately to avoid data loss or data corruption. The DIMM is a part of the controller battery pack.
Event ID — 2322 Description The DC power supply is switched off. Severity Informational Cause and Action Cause: The power supply unit is switched off. Either a user switched off the power supply unit or it is defective. Action: Check if the power switch is turned off. If it is turned off, turn it on. If the problem persists, check if the power cord is attached and functional. If the problem is still not corrected or if the power switch is already turned on, replace the power supply unit.
Related Alert Information Clear Alert Number: 2325 Related Alert Number: None Local Response Agent (LRA) Number: 2091 SNMP Trap Numbers 1004 Event ID — 2325 Description The power supply cable has been inserted. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Status: Alert 2325 is a clear alert for alerts 2324 and 2312.
Severity Warning / Non-critical Cause and Action Cause: The nonvolatile random access memory (NVRAM) is corrupt. This may occur after a power surge, a battery failure, or for other reasons. The controller is reinitializing the NVRAM. The controller properties reset to the default settings after the reinitialization is complete. NOTE: The controller is taking the required corrective action. If this alert is generated often (such as during each reboot), replace the controller.
devices such as the controller or EMM. See the hardware documentation for more information. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event ID — 2330 Description SAS port report: %1 Severity OK / Normal / Informational Cause and Action Cause: The %1 indicates a substitution variable. The text for this substitution variable is generated by the controller and is displayed with the alert in the alert log.
Event ID — 2332 Description A controller hot plug has been detected. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2334 Description Controller event log: %1 Severity OK / Normal / Informational Cause and Action Cause: The %1 indicates a substitution variable.
Action: If there is a problem, review the controller event log and the Server Administrator alert log for significant events or alerts that may assist in diagnosing the problem. Check the health of the storage components. See the hardware documentation for more information. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event ID — 2336 Description Controller event log: %1.
Local Response Agent (LRA) Number: 2101 SNMP Trap Numbers 1154 Event ID — 2338 Description The controller has recovered cached data from the BBU. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2339 Description The factory default settings have been restored.
Action: Replace the physical disk that contains the disk errors. Review other alert messages to identify the physical disk that has errors. If the virtual disk is redundant, you can replace the physical disk and continue using the virtual disk. If the virtual disk is non-redundant, you may need to recreate the virtual disk after replacing the physical disk. After replacing the physical disk, run Check Consistency to check the data.
Local Response Agent (LRA) Number: 2080 SNMP Trap Numbers 1203 Event ID — 2343 Description The Check Consistency logging of inconsistent parity data is disabled. Severity Warning / Non-critical Cause and Action Cause: The Check Consistency can no longer report errors in the parity data. Action: See the hardware documentation for more information.
Action: Verify the health of attached devices. Review the Alert Log for significant events. Make sure the cables are attached securely. See the Cables Attached Correctly section for more information on checking the cables. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2081 SNMP Trap Numbers 1204 Event ID — 2346 Description Error occurred: %1.
Related Alert Information • If the file backup fails, try to restore the failed file from a previous backup. • When the backup with the Verify option is complete without any errors, delete the Virtual Disk. • Recreate a new Virtual Disk with new drives. • Restore the data from backup. Clear Alert Number: None Related Alert Number: 2195, 2346 Local Response Agent (LRA) Number: 2071 SNMP Trap Numbers 904 Event ID — 2348 Description The rebuild failed due to errors on the target physical disk.
SNMP Trap Numbers 904 Event ID — 2350 Description There was an unrecoverable disk media error during the rebuild or recovery operation. Severity Critical / Failure / Error Cause and Action Cause: The rebuild or recovery operation encountered an unrecoverable disk media error. Action: Replace the disk.
Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2353 Description The enclosure temperature has returned to normal. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Status: Alert 2353 is a clear alert for alerts 2100 and 2101.
Action: Attempt to download the enclosure firmware again. If problems continue, verify that the controller can communicate with the enclosure. Make sure that the enclosure is powered on. Check the cables. See the Cables Attached Correctly section for more information on checking the cables. Verify the health of the enclosure and its components. To verify the health of the enclosure, select the enclosure object in the tree view.
Action: There may be a problem with the enclosure. Check the health of the enclosure and its components by selecting the enclosure object in the tree view. The Health subtab displays a red X or yellow exclamation point for enclosure components that are Failed or Degraded. See the enclosure documentation for more information.
Event ID — 2360 Description A user has discarded data from the controller cache. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2361 Description Physical disk(s) that are part of a virtual disk have been removed while the system was shut down.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2364 Description All virtual disks are missing from the controller. This situation was discovered during system start-up. Severity Warning Cause and Action Cause: This alert is for informational purposes.
Action: All physical disks in the virtual disk must use the same technology. You cannot use both SAS and SATA physical disks in the same virtual disk. Remove the physical disk and insert a new physical disk that uses the correct technology. If the rebuild does not start automatically after you have inserted a suitable physical disk, then run the Rebuild task.
Event ID — 2370 Description Redundant Path View cleared. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2371 Description Attempted import of Unsupported Virtual Disk type RAID%1.
SNMP Trap Numbers 751 Event ID — 2373 Description Attempted import of unsupported Virtual Disk type RAID %1. Severity OK / Normal / Informational Cause and Action Cause: This alert is provided for informational purposes. User is attempting to import a foreign virtual disk with unsupported RAID level on the controller. Action: None.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2376 Description Attempted import of Virtual Disk with stale physical disk. Severity OK / Normal / Informational Cause and Action Cause: User is attempting to import a foreign virtual disk with a stale physical disk. This alert is provided for informational purposes. Action: None.
Cause and Action Cause: User is attempting to import an incompatible physical drive. This alert is provided for informational purposes. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2379 Description An overflow of the foreign configuration has occurred. You can import the foreign configuration in multiple attempts.
Event ID — 2381 Description Controller preserved cache is recovered. Severity OK / Normal / Informational Cause and Action Cause: This alert is provided for informational purposes. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2382 Description An unsupported configuration was detected.
Related Alert Information Clear Alert Number: 2195 Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2384 Description The Warning level set for the hot spare protection policy is violated for the Virtual Disk. Severity Warning / Non-critical Cause and Action Cause: The number of physical disks you specified for the hot spare protection policy is violated.
Event ID — 2386 Description Drive could not be assigned as Dedicated Hot Spare. Severity Informational Cause and Action Cause: The assignment of a Dedicated Hot Spare fails as the disk is invalid. Action: None. Related Alert Information Clear Alert Number: 2195 Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2387 Description A virtual disk bad block medium error is detected.
Event ID — 2388 Description The Controller Encryption Key is destroyed. Severity OK / Normal / Informational Cause and Action Cause: The Controller Encryption Key is destroyed. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2389 Description The virtual disk bad block medium error is cleared.
SNMP Trap Numbers 901 Event ID — 2392 Description The drive Encryption Key is invalid. Severity Warning / Non-critical Cause and Action Cause: The controller failed to verify the specified Passphrase. Action: Enter a correct Passphrase. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event ID — 2393 Description The virtual disk is encrypted.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2395 Description Persistent Hot Spare is disabled. Severity OK / Normal / Informational Cause and Action Cause: The Persistent Hot Spare option is disabled. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2396 Description The Check Consistency detected uncorrectable multiple medium errors.
Action: Replace the failed physical disk. You can identify the failed disk by locating the disk that has a red “X” for its status. Rebuild the physical disk. When finished, restart the check consistency operation. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1204 Event ID — 2398 Description The Manage Physical Disk Power property(s) changed.
Event ID — 2400 Description Physical disk configuration data updated as it was stale. Severity Informational Cause and Action Cause: The physical disk configuration data is updated because it was outdated. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2401 Description Configuration command could not be committed to disk. Configuration has to be re applied.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 904 Event ID — 2403 Description Virtual Disk is available. Severity OK / Normal / Informational Cause and Action Cause: The operating system detects the newly created virtual disk. Action: None. NOTE: This alert also appears when a CacheCade is created but is not available for the operating system (as it is a CacheCade and not a Virtual Disk).
Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 903 Event ID — 2407 Description Controller Encryption mode is enabled in LKM. Severity Informational Cause and Action Cause: The Local Key Management (LKM) encryption mode is enabled. Action: None.
Cause and Action Cause: This alert is provided for informational purposes. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2413 Description Controller CacheCade is created. Severity Informational Cause and Action Cause: This alert is provided for informational purposes.
Severity Informational Cause and Action Cause: The battery learn cycle has started. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2416 Description Disk medium error detected. Severity Warning / Non-critical Cause and Action Cause: A part of the physical disk is damaged. Action: None.
NOTE: If the unrecoverable medium error has not been corrected, it may be reported again by the system. This error can be fixed by writing data on the affected area or deleting and recreating the Virtual Disk as demonstrated in the following procedure. Related Alert Information 1. Back up the data. 2. Delete the Virtual Disk. 3. Recreate the Virtual Disk using the same parameters like size, RAID level, disks, etc. 4. Restore data.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2426 Description State change on Physical disk from Non- RAID to READY. Severity Informational Cause and Action Cause: User triggered action. Action: Configure the drive to be ready using CLI/GUI. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2429 Description Drive Prepared for Removal.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2431 Description Physical Device Full Initialization completed. Severity Informational Cause and Action Cause: User triggered task. Action: None.
Cause and Action Cause: User triggered task. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2434 Description Physical Device has reached or exceeded its warranted device wear-out limit. Severity Warning Cause and Action Cause: User triggered task. Action: None.
Severity Critical Cause and Action Cause: User triggered task. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 904 Event ID — 2437 Description The physical device blink has initiated. Severity Informational Cause and Action Cause: User triggered task. Action: None.
Event ID — 2440 Description The physical device available space is below threshold. Severity Warning Cause and Action Cause: None Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 904 Event ID — 2441 Description The PCIe solid state device identified in the message has turned off because the critical temperature threshold of the device was exceeded.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 904 Event ID — 2443 Description The volatile memory backup device on the PCIe solid state device identified in the message is no longer functional. Data loss is possible. Severity Error Cause and Action Cause: None Action: Back up the data on the device, and contact your service provider for further instructions.
Action: No response action is required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2446 Description The controller identified in the message has been changed to a new personality mode (HBA or RAID). Severity Informational Cause and Action Cause: User Triggered Task Action: No response action is required.
Event ID — 2448 Description The Remaining Rated Write Endurance (RRWE) Threshold for SAS and SATA SSD is set to . Severity Informational Cause and Action Cause: The Remaining Rated Write Endurance (RRWE) Threshold for SAS and SATA solid-state drives has been modified. Action: No response action is required.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 1604 . Event ID — 2700 Description The following journal mirror is available. %1 Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1601 Event ID — 2701 Description The following journal mirror is being replaced.(wwn ) %1 : FluidCache. Severity Information Cause and Action No action required.
SNMP Trap Numbers 1603 Event ID — 2703 Description There are not enough journal mirrors available to operate. : FluidCache. Severity Error Cause and Action To resolve the issue, you must ensure that there are at least two journal mirrors that are accessible. You must activate either one or more failed cache devices or use the fldc_restore utility to rebuild the node.
SNMP Trap Numbers 1604 Event ID — 2874 Description The following Cache Device has no associated server in the configuration: %1 : FluidCache. Severity Warning Cause and Action There is a cache device specified in the configuration with no associated cache server configured. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 903 Event ID — 2875 Description The following Disk is beginning flushing.
Event ID — 2900 Description The following cache device has failed. (wwn) %1 (path) %2 : FluidCache. Severity Error Cause and Action Replace the failed device. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 904 Event ID — 2901 Description The following storage device is either inaccessible or failed. (wwn) %1 (path) %2 : FluidCache.
Event ID — 2903 Description The following cache device has been registered. (ww n) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2904 Description The following cache device has been removed. (wwn ) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required.
Event ID — 2906 Description Caching is being removed for the following storage device. (wwn) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201, 1501, 1601 Event ID — 2907 Description Caching has been enabled on the following storage device. (wwn) %1 (path) %2 : FluidCache.
Event ID — 2909 Description The following journal mirror is available. %1The following storage device is in an unknown state.(wwn) %1 (path) %2 : FluidCache. Severity Warning Cause and Action Service is required. Contact Technical Support. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1203, 1503 Event ID — 2910 Description Caching has been disabled for the following storage device.
Event ID — 2912 Description Resilvering for the following cache device is complete .(wwn) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2913 Description The following failed cache device has completed recovery. (wwn) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required.
Event ID — 2915 Description No valid license is installed.: FluidCache. Severity Error Cause and Action A valid license must be installed. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1604 Event ID — 2916 Description Running on an evaluation license. Days remaining %1 (days): FluidCache. Severity Information Cause and Action A permanent license should be purchased.
Event ID — 2918 Description Running on an expired evaluation license. Caching functionality is disabled. Expired days: % 1: FluidCache Severity Error Cause and Action A permanent license must be installed. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1604 Event ID — 2919 Description Running on an expired/invalid license. Configuration changes are disabled.: FluidCache.
Event ID — 2921 Description A license has been removed.: FluidCache. Severity Information Cause and Action A license should be installed. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1601 Event ID — 2922 Description Not enough memory to run necessary services.: FluidCache. Severity Error Cause and Action You must run on a system with adequate memory.
Event ID — 2924 Description All cache devices have been found and registered.: FluidCache. Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1601 Event ID — 2930 Description Even though caching was enabled in write-back mode, it is currently operating in write-through mode.: FluidCache.
Event ID — 2932 Description Caching is no longer degraded to write-through mode and is now operating in write-back mode.: FluidCache. Severity Warning Cause and Action No action required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1203, 1503, 1603 Event ID — 2933 Description Caching is no longer degraded to pass-through mode and is now operating in its configured mode.: FluidCache.
System Event Log Messages for IPMI Systems 4 The tables in this chapter list the system event log (SEL) messages, their severity, and cause. NOTE: For corrective actions, see the appropriate documentation. Temperature Sensor Events The temperature sensor event messages help protect critical components by alerting the systems management console when the temperature rises inside the chassis.
Event Message Severity Cause The temperature is less than the lower critical threshold. Critical Temperature of the backplane, system board, system inlet, or the carrier in the specified system entered into critical state. The temperature is greater than the upper warning threshold.
Event Message Severity Cause voltage sensor detected a warning . Warning Voltage of the monitored entity exceeded the warning threshold. voltage sensor returned to normal . Information The voltage of a previously reported is returned to normal state. The voltage is less than the lower warning threshold.
Event Message Severity Cause Fan sensor returned to normal state . Information The fan specified by has returned to its normal operating speed. Fan sensor detected a warning . Warning The speed of the specified fan may not be sufficient to provide enough cooling to the system. Fan Redundancy sensor redundancy degraded.
Event Message Severity Cause Fan RPM is within range. Information The speed of the specified fan is operating in a normal range. Fan is removed. Critical A required fan was removed. Fan was inserted. Information A fan was added. Fan is present. Information The total number of fans present. Fan is absent. Critical A required fan is missing. The fans are redundant.
Event Message Severity Cause status processor sensor disabled. Warning This event is generated for all processors that are disabled. status processor sensor terminator not present. Information This event is generated if the terminator is missing on an empty processor slot. presence was deasserted. Critical This event is generated when the system could not detect the processor. presence was asserted.
Event Message Severity Cause CPU terminator is absent. Warning This event is generated if the terminator is missing on an empty processor slot. CPU is throttled. Warning This event is generated when the processor slows down to prevent overheating. CPU is absent. Critical This event is generated when the system could not detect the processor. CPU is operating correctly. Information This event is generated when the processor recovered from an error.
Event Message Severity Cause predictive failure was asserted. Critical This event is generated when the power supply is about to fail. input lost was asserted. Critical This event is generated when the power supply is unplugged. predictive failure was deasserted. Information This event is generated when the power supply has recovered from an earlier predictive failure event.
Event Message Severity Cause PS 1 Status: Power supply sensor for PS 1, configuration error was asserted. Warning/Critical This event is generated when an invalid power supply configuration is detected. PS 1 Status: Power supply sensor for PS 1, configuration error was deasserted. Information This event is generated when the power supply has recovered from an earlier invalid configuration. Power supply is present. Information This event is generated when the power supply is plugged in.
Event Message Severity Cause The temperature for power supply is outside of range. Critical Temperature of specified power supply entered into critical state. An under voltage fault detected on power supply . Critical The specified power supply detected inefficient voltage. An over voltage fault detected on power supply . Critical The specified power supply detected an over voltage condition. An over current fault detected on power supply .
Memory ECC Events The memory ECC event messages monitor the memory modules in a system. These messages monitor the ECC memory correction rate and the type of memory events that occurred. Table 10. Memory ECC Events Event Message Severity Cause ECC error correction detected on Bank # DIMM [A/B]. Information This event is generated when there is a memory error correction on a particular Dual Inline Memory Module (DIMM). ECC uncorrectable error detected on Bank # [DIMM].
BMC Watchdog Events Enter a short description for your reference topic. This should be one or two sentences that describes the topic content. Table 11. BMC Watchdog Events Event Message Severity Cause BMC OS Watchdog timer expired. Information This event is generated when the BMC watchdog timer expires and no action is set. BMC OS Watchdog performed system reboot.
Event Message Severity Cause was received from Host) and the action is set to power off. The OS watchdog timer expired. Critical This event is generated when the BMC watchdog timer expires and no action is set. Memory Events The memory modules can be configured in different ways in particular systems. These messages monitor the status, warning, and configuration information about the memory modules in the system. Table 12. Memory Events Event Message Severity Cause Memory RAID redundancy degraded.
Event Message Severity Cause Memory Spared redundancy regained. Information This event is generated when the redundancy lost or degraded earlier is regained in a spared memory configuration. Memory RAID is redundant. Information This event is generated when the memory redundancy mode has change to RAID redundant. Memory RAID redundancy is lost. Check memory device at location(s) . Critical This event is generated when redundancy is lost in a RAIDconfigured memory configuration.
Hardware Log Sensor Events The hardware logs provide hardware status messages to the system management software. On particular systems, the subsequent hardware messages are not displayed when the log is full. These messages provide status and warning messages when the logs are full. Table 13. Hardware Log Sensor Events Event Message Severity Cause Log full detected. Critical This event is generated when the SEL device detects that only one entry can be added to the SEL before it is full. Log cleared.
Event Message Severity Cause Drive consistency check in progress was deasserted. Information This event is generated when the consistency check of the drive is completed. Drive in critical array was asserted. Critical This event is generated when the drive is placed in critical array. Drive in critical array was deasserted. Information This event is generated when the drive is removed from critical array. Drive in failed array was asserted.
Event Message Severity Cause sensor intrusion was asserted while system was ON. Critical This event is generated when the intrusion sensor detects an intrusion while the system is on. sensor intrusion was asserted while system was OFF. Critical This event is generated when the intrusion sensor detects an intrusion while the system is off. The chassis is open. Critical This event is generated when the intrusion sensor detects an intrusion.
Event Message Severity Cause System Event PCI System Err. Information This event indicates historical data, and is generated when the system has crashed and recovered. System Event PCI Fatal Err. Critical This error is generated when a fatal error is detected on the PCI bus. System Event PCIE Fatal Err. Critical This error is generated when a fatal error is detected on the PCIE bus. POST Err. Critical This event is generated when an error occurs during system boot.
Event Message Severity Cause Memory Removed (BANK# DIMM#) presence was asserted. Information This event is generated when memory is removed from the system. Memory Cfg Err configuration error (BANK# DIMM#) was asserted. Critical This event is generated when memory configuration is incorrect for the system. Mem Redun Gain redundancy regained. Information This event is generated when memory redundancy is regained. Mem ECC Warning transition to noncritical from OK.
Event Message Severity Cause SBE Log Disabled correctable memory error logging disabled was asserted. Critical This event is generated when the ECC single bit error rate is exceeded. CPU Protocol Err transition to nonrecoverable. Critical This event is generated when the processor protocol enters a nonrecoverable state. CPU Bus PERR transition to non-recoverable. Critical This event is generated when the processor bus PERR enters a non-recoverable state.
Event Message Severity Cause An I/O channel check error was detected. Critical This event is generated when a critical interrupt is generated in the I/O Channel. A PCI parity error was detected on a component at bus device function . Critical This event is generated when a parity error is detected on the PCI bus. A PCI parity error was detected on a component at slot . Critical This event is generated when a parity error is detected on the PCI bus.
Event Message Severity Cause A fatal error was detected on a component at slot . Critical This error is generated when a fatal error is detected on the PCI bus. A fatal IO error detected on a component at bus device function . Critical This error is generated when a fatal IO error is detected. A fatal IO error detected on a component at slot . Critical This error is generated when a fatal IO error is detected.
Event Message Severity Cause An OEM diagnostic event occurred. Information This event is generated when an OEM event occurs. OEM events can be used by the service team to better understand the cause of the failure. CPU protocol error detected. Critical This event is generated when the processor protocol enters a nonrecoverable state. CPU bus parity error detected. Critical This event is generated when the processor bus PERR enters a non-recoverable state.
Event Message Severity Cause Device option ROM on mezzanine card failed to support Link Tuning or FlexAddress. Critical This event is generated when the PCI device option ROM for a NIC does not support link tuning or the Flex addressing feature. Failed to program virtual MAC address on a component at bus device function . Critical This event is generated when BIOS fails to program virtual MAC address on the given NIC device.
Fatal Error Code Description Cause 85 DMA controller failure. This error code indicates DMA controller failure. 86 Interrupt controller failure. This error code indicates interrupt controller failure. 87 Timer refresh failure. This error code indicates timer refresh failure. 88 Programmable interval timer error. This error code indicates a programmable interval timer error. 89 Parity error. This error code indicates a parity error. 8A SIO failure. This error code indicates SIO failure.
Operating System Generated System Events Table 18. Operating System Generated System Events Description Severity Cause System Event: OS stop event OS graceful shutdown detected Information The operating system was shutdown/restarted normally. OEM Event data record (after OS graceful shutdown/restart event) Information Comment string accompanying an operating system shutdown/ restart.
Description Severity Cause not connected or is incorrectly connected. connected or is improperly connected. Information This event is generated when named cable or interconnect earlier cable or interconnect connection error was corrected. Description Severity Cause Failed was asserted Critical This event is generated when the sensor detects a failed or missing battery.
Power And Performance Events The power and performance events are used to detect degradation in system performance with change in power supply. Table 21. Power And Performance Events Description Severity Cause System Board Power Optimized: Performance status sensor for System Board, degraded, was deasserted Normal This event is generated when system performance was restored.
Description Severity Cause System Board Power Optimized: Performance status sensor for System Board, Halted, system power exceeds capacity was asserted Critical This event is generated when a change in power supply degrades system performance. System Board Power Optimized: Performance status sensor for System Board, Halted, system power exceeds capacity was deasserted Normal This event is generated when system performance was restored. The system performance degraded.
Entity Presence Events The entity presence messages are used for detecting different hardware devices. Table 22. Entity Presence Events Description Severity Cause presence was asserted Information This event is generated when the device was detected. absent was asserted Critical This event is generated when the device was not detected. The is present. Information This event is generated when the device was detected. The is absent.
Description Severity Cause Hdwar version err: Version Change sensor, hardware incompatibility (BMC firmware and CPU mismatch) was asserted Critical This event is generated when the CPU and firmware are not compatible. Link Tuning: Version Change sensor, successful software or F/W change was deasserted Warning This event is generated when the link tuning setting for proper NIC operation fails to update.
Description Severity Cause The QuickPath Interconnect (QPI) width degraded. Warning This event is generated when the bus is not operating at maximum speed or width. The QuickPath Interconnect (QPI) width regained. Information This event is generated when the bus is operating at maximum speed or width. BIOS detected an error configuring the Intel Trusted Execution Technology (TXT). Critical This event is generated when TXT initialization failed.
