Reference Guide

PFM Event Messages
PFM0001
Message The value of arg1 is greater than the upper critical threshold.
Arguments arg1 = sensor name
Detailed
Description
The utilization value of the sensor identified in the message is higher than the
upper critical threshold.
Recommended
Response
Action
Check the work load of the server and reduce the workload if necessary to bring
the system performance into required ranges. For more information about the
specified values, see the relevant product documentation available at the support
site.
Category System Health (PFM = System Performance Event)
Severity Severity 1 (Critical)
No alerts are applicable for this message
PFM0002
Message The value of arg1 is greater than the upper warning threshold.
Arguments arg1 = sensor name
Detailed
Description
The utilization value of the sensor identified in the message is higher than the
upper warning threshold.
Recommended
Response
Action
Check the work load of the server and reduce the workload if necessary to bring
the system performance into required ranges. For more information about the
specified values, see the relevant product documentation available at the support
site.
Category System Health (PFM = System Performance Event)
Severity Severity 2 (Warning)
Trap/EventID 2650
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC
998