Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔ ✔
CMC ✔ ✔* ✔ ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC ✔ ✔*
PDR88
Message Power state change failed on arg1 . (from arg2 to arg3 )
Arguments arg1 = PD Name, arg2 = state, arg3 = state
Detailed
Description
When physical drives in spun down power state are configured, the drives should
transition to spun up power state.. If the drive is not functioning properly, this
transition could fail.
Recommended
Response
Action
Replace the physical disk and try again. Contact technical support if the issue
persists.
Category Storage (PDR = Physical Disk)
Severity Severity 1 (Critical)
Trap/EventID 4345
OMSA Event ID 2402
OMSA Trap ID 90400
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔ ✔
CMC ✔ ✔* ✔ ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC ✔ ✔*
PDR9
Message Initialization has started on arg1 .
Arguments arg1 = physical disk
992