Reference Guide

PCI3002
Message Failed to program virtual MAC address on a component at bus arg1 device arg2
function arg3 .
Arguments arg1 = bus, arg2 = device, arg3 = func
Detailed
Description
Either the BIOS, BMC/iDRAC, LOM, or NIC firmware is out of date and does not
support FlexAddress.
Recommended
Response
Action
Update BIOS, BMC/iDRAC, LOM, and mezzanine card firmware. If problem persists
please contact customer support.
Category System Health (PCI = PCI Device)
Severity Severity 1 (Critical)
Trap/EventID 2417
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC
PCI3003
Message Virtual MAC address for component at bus arg1 device arg2 function arg3 was
successfully programed.
Arguments arg1 = bus, arg2 = device, arg3 = func
Detailed
Description
None
Recommended
Response
Action
No response action is required.
Category System Health (PCI = PCI Device)
Severity Severity 3 (Informational)
Trap/EventID 2419
885