Reference Guide

OSD56
Message An ISO is already connected using Remote File Share (RFS).
Detailed
Description
An ISO is already connected using Remote File Share (RFS). The connection might
have been initiated from iDRAC GUI, racadm, or Remote Services API.
Recommended
Response
Action
Disconnect the Remote File Share (RFS) using iDRAC GUI, racadm, or Remote
Services API and then retry the operation to connect the ISO again.
Category Configuration (OSD = OS Deployment)
Severity Severity 3 (Informational)
No alerts are applicable for this message
OSD57
Message Remote File Share (RFS) is in Auto-Attach mode.
Detailed
Description
Remote File Share (RFS) is currently configured to be in auto-attach mode. For Web
services to attach an ISO, RFS should be changed to attach mode.
Recommended
Response
Action
Change the Remote File Share (RFS) mode to Attach using iDRAC GUI or Remote
Services API and retry.
Category Configuration (OSD = OS Deployment)
Severity Severity 2 (Warning)
No alerts are applicable for this message
OSD58
Message Unable to connect an ISO using Remote File Share (RFS).
Detailed
Description
The connect ISO operation using Remote File Share (RFS) did not complete
successfully.
Recommended
Response
Action
Verify all the parameters are correct. If the problem persists. then reset iDRAC and
retry the operation.
Category Configuration (OSD = OS Deployment)
Severity Severity 2 (Warning)
No alerts are applicable for this message
852