Reference Guide

OSD34
Message Unable to continue with BootToPXE - ISO image is attached to the system.
Detailed
Description
Unable to continue with BootToPXE command because the system has an ISO
image attached. Detach the ISO image before continuing with BootToPXE.
Recommended
Response
Action
Run the DetachISOImage command and then run BootToPXE.
Category Configuration (OSD = OS Deployment)
Severity Severity 3 (Informational)
No alerts are applicable for this message
OSD35
Message Lifecycle Controller is not enabled.
Detailed
Description
Lifecycle Controller is disabled on the system, so none of the remote operating
system deployment commands will work. Make sure Lifecycle Controller is enabled
before running any command.
Recommended
Response
Action
Reboot the system and enable System Services by pressing CTRL+E option when
prompted to do so in the POST. This launches the iDRAC configuration utility
where Lifecycle Controller can be enabled.
Category Configuration (OSD = OS Deployment)
Severity Severity 3 (Informational)
No alerts are applicable for this message
OSD36
Message Boot to ISO Image has been cancelled by using CTRL+E option on the server.
Detailed
Description
User has cancelled system services by using the CTRL+E option (iDRAC
configuration utility) during POST. This action cancels the WSMAN request to boot
to ISO.
Recommended
Response
Action
To resolve the issue rerun the command. Do not cancel system services using
CTRL+E during POST when system is rebooting to the ISO.
Category Configuration (OSD = OS Deployment)
Severity Severity 2 (Warning)
No alerts are applicable for this message
844