Reference Guide

Recommended
Response
Action
1) Rerun the command. 2) Reset iDRAC and run the command.
Category Configuration (OSD = OS Deployment)
Severity Severity 1 (Critical)
No alerts are applicable for this message
OSD20
Message Unable to get size or label from Driver Pack for selected operating system.
Detailed
Description
Unable to get the size or label for selected operating system from the Driver Pack
present in Lifecycle Controller. The driver pack may be corrupt.
Recommended
Response
Action
Update the Driver Pack using USC or DUP and rerun the command.
Category Configuration (OSD = OS Deployment)
Severity Severity 2 (Warning)
No alerts are applicable for this message
OSD21
Message Unable to boot to ISO image.
Detailed
Description
Booting to ISO has failed. Either BIOS was unable to boot to the ISO image or the
provider did not get a response in 5 minutes from BIOS on successful boot to ISO
image.
Recommended
Response
Action
1) Make sure that a POST error did not result in user interaction (Press F1 to
continue or F2 to run BIOS setup). 2) Reset iDRAC and rerun the command.
Category Configuration (OSD = OS Deployment)
Severity Severity 2 (Warning)
No alerts are applicable for this message
OSD22
Message Unable to detach ISO image from the host.
Detailed
Description
Unable to detach ISO image from the host because either the image is already
detached, or iDRAC may not be operating normally.
839