Reference Guide

Category Configuration (NIC = NIC Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
NIC024
Message The set operation did not complete successfully as the attribute is read-only.
Detailed
Description
The attribute specified in the operation is currently read only and the value cannot
be modified.
Recommended
Response
Action
For more information on the attribute, see Lifecycle Controller-Remote Services
documentation.
Category Configuration (NIC = NIC Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
NIC100
Message The NIC arg1 Port arg2 network link is down.
Arguments arg1 = Controller, arg2 = Port
Detailed
Description
The network link is down. Either the network cable is not connected or the
network device is not working.
Recommended
Response
Action
Verify that the network port is enabled and if the port has Activity/Speed LEDs, that
they are lit. Check the network cable, network cable connections, and the attached
network switch.
Category System Health (NIC = NIC Config)
Severity Severity 2 (Warning)
Trap/EventID 2090
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔* ✔* ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC
826