Reference Guide

Recommended
Response
Action
Use a valid BIOS password and retry.
Category Configuration (NIC = NIC Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
NIC021
Message Cannot authenticate specified BIOS password.
Detailed
Description
The old BIOS password used to change the password is incorrect.
Recommended
Response
Action
Enter the correct old password for the BIOS and retry the operation.
Category Configuration (NIC = NIC Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
NIC022
Message Unable to set the BIOS password because of a jumper setting on the motherboard.
Detailed
Description
The current BIOS password jumper setting prevents the BIOS password from being
changed.
Recommended
Response
Action
Change the jumper setting to enable setting the BIOS password.
Category Configuration (NIC = NIC Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
NIC023
Message Cannot perform the operation due to an unknown error in iDRAC.
Detailed
Description
The operation did not complete successfully because of an unknown error in
iDRAC.
Recommended
Response
Action
Retry the action. If the issue persists, reset the iDRAC.
825