Reference Guide

LIC503
Message Unable to complete the current operation. The currently installed license does not
support the following features: arg1 .
Arguments arg1 = licensable features
Detailed
Description
The currently installed license does not support the feature for the requested
operation. The operation requires a valid license to enable specific features in the
system. Since the required license is missing or expired, the features that are being
accessed during the operation are disabled.
Recommended
Response
Action
Acquire and install the license to enable the required feature, and retry the
operation. If the problem persists, contact technical support or see product
documentation for more information.
Category Audit (LIC = Licensing)
Severity Severity 2 (Warning)
No alerts are applicable for this message
LIC900
Message The command was successful.
Detailed
Description
The operation was successful.
Recommended
Response
Action
No response action is required.
Category Configuration (LIC = Licensing)
Severity Severity 3 (Informational)
No alerts are applicable for this message
LIC901
Message Invalid parameter value for arg1 .
Arguments arg1 = parameter
Detailed
Description
The value provided for the specified parameter is invalid.
Recommended
Response
Action
To provide the correct value for the specified parameter, see Lifecycle Controller-
Remote Services documentation.
Category Configuration (LIC = Licensing)
750