Reference Guide

LC011
Message Certificate import operation failed.
Detailed
Description
There was a general failure in the certificate import process.
Recommended
Response
Action
Try one of the following: 1) Rerun the command. 2) Reset iDRAC and run the
command.
Category Configuration (LC = Lifecycle Contr)
Severity Severity 1 (Critical)
No alerts are applicable for this message
LC012
Message Another process is using Lifecycle Controller.
Detailed
Description
Lifecycle Controller is in use by another process. Wait for other process to
complete before attempting to run another command.
Recommended
Response
Action
Try one of the following: 1) Rerun the command after about 2 minutes. 2) Make
sure that Lifecycle Controller Unified Server Configurator or an Update Package is
not currently running on the server 3) Reset iDRAC and rerun the command.
Category Configuration (LC = Lifecycle Contr)
Severity Severity 2 (Warning)
No alerts are applicable for this message
LC013
Message A configuration job cannot be created because there are no pending values to
change.
Detailed
Description
No changes are available between the previous configuration and the current
configuration. At least one attribute should be changed to create a configuration
job.
Recommended
Response
Action
Change the configuration of one or more attributes before creating a configuration
job.
Category Configuration (LC = Lifecycle Contr)
Severity Severity 3 (Informational)
No alerts are applicable for this message
711