Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
JCP008
Message Job completed with errors.
Detailed
Description
Multiple attributes were set in the operation but some set attribute actions were
not successful. For example, setting an attribute that is not valid for the component
being configured,
Recommended
Response
Action
Examine the results of the configuration job in the Lifecycle Log for the source of
the errors. Modify the settings as necessary and resubmit the job.
Category Configuration (JCP = Job Control)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
JCP009
Message Scheduled job was cancelled.
Detailed
Description
Scheduled jobs were deleted as a result of a cancel job request. The job
cancellation request is manually or programmatically initiated. Lifecycle Controller
enters Recovery mode when unrecoverable and persistent errors occur.
Recommended
Response
Action
If the job was not cancelled manually, then Lifecycle Controller may be in Recovery
mode. To verify or change Recovery mode, use F2 Setup to select iDRAC
Configuration then Lifecycle Controller Settings.
696