Reference Guide

IOV121
Message PCIe ride-through time out has changed from arg1 to arg2 seconds.
Arguments arg1 = seconds, arg2 = seconds
Detailed
Description
The Chassis Management Controller (CMC) has changed the PCIe ride-through
timeout to the value identified in the message. PCIe adapters will remain turned on
for the number of seconds specified by the ride-through timeout value after the
server they are assigned to is turned off. Note: A value of zero equals infinite
number of seconds.
Recommended
Response
Action
No response action is required.
Category Configuration (IOV = IO Virtualization)
Severity Severity 3 (Informational)
Trap/EventID 10747
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔
CMC ✔ ✔ ✔ ✔
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC ✔* ✔ ✔*
IOV122
Message arg1 arg2 is mapped/assigned to extension of server slot arg3 .
Arguments arg1 = "PCIE Slot" or "PERC VA", arg2 = slot number or VA number, arg3 = server
number
Detailed
Description
The PCIE Slot or PERC Virtual Adapter (VA) identified in the message has been
assigned to the extension of the server slot identified in the message.
Recommended
Response
Action
No response action is required.
Category Configuration (IOV = IO Virtualization)
Severity Severity 3 (Informational)
Trap/EventID 10747
678