Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC ✔* ✔ ✔*
IOV116
Message PCIE AUX power cable arg1 .was disconnected while powered on.
Arguments arg1 = cable number
Detailed
Description
The Chassis Management Controller (CMC) detected a power fault in an PCIE AUX
power cable after the adapter was powered on. A power fauilt may be caused by a
loose cable connection to the adapter or between the cable and the AUX cable
harness.
Recommended
Response
Action
Make sure AUX power cable identified in the message is fully plugged into the
adapter and the AUX cable harness.
Category System Health (IOV = IO Virtualization)
Severity Severity 2 (Warning)
Trap/EventID 2554
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC ✔ ✔ ✔ ✔
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC ✔* ✔ ✔*
IOV117
Message arg1 arg2 was unassigned/unmapped from server- arg3 .
Arguments arg1 = "PCIE Slot" or "PERC VA", arg2 = slot number or VA number, arg3 = server
numer
Detailed
Description
The PCIE Slot or PERC Virtual Adapter(VA) identified in the message has been
unassigned/unmapped from the server identified in the message.
Recommended
Response
Action
No response action is required.
Category Configuration (IOV = IO Virtualization)
675