Reference Guide

IOV107
Message PCIe adapter arg1 in slot arg2 was removed while powered on.
Arguments arg1 = device dame, arg2 = slot number
Detailed
Description
The Chassis Management Controller (CMC) has detected the removal of a PCIe
adapter card while it was powered on.
Recommended
Response
Action
Power down the affected server(s) and then power on the server(s). Note: OS
reboot only will not correct this issue.
Category System Health (IOV = IO Virtualization)
Severity Severity 1 (Critical)
Trap/EventID 2553
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔
CMC ✔ ✔* ✔* ✔
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC ✔* ✔* ✔ ✔*
IOV108
Message Power fault detected on PCIE adapter arg1 in arg2 arg3 .
Arguments arg1 = device name, arg2 = slot type, arg3 = slot number
Detailed
Description
The Chassis Management Controller (CMC) detected a power fault in an adapter
after the adapter was powered on. A power fault may be caused by a damaged
adapter or the adapter power requirements exceed the maximum power limits of
the slot.
Recommended
Response
Action
Make sure a supported PCIe device is used and that it is properly inserted in the
PCIe slot. For a list of supported devices, contact your service provider.
Category System Health (IOV = IO Virtualization)
Severity Severity 2 (Warning)
Trap/EventID 2554
670