Reference Guide

Recommended
Response
Action
Make sure that supported adapters are used and installed correctly in the PCIe slot.
Category System Health (IOV = IO Virtualization)
Severity Severity 2 (Warning)
Trap/EventID 2554
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔
CMC ✔ ✔* ✔* ✔
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC ✔* ✔* ✔ ✔*
IOV106
Message Unable to power on PCIe adapter arg1 in arg2 arg3 .
Arguments arg1 = device name, arg2 = slot type, arg3 = slot number
Detailed
Description
The Chassis Management Controller (CMC) is unable to power on adapter. Possible
reasons for power failures are: 1) Adapter not an approved adapter. 2) Adapter not
fully inserted in the slot 3) Auxiliary power cable not connected (applicable to slot 1
- 3 only). 4) Adapter is damaged.
Recommended
Response
Action
Make sure a supported PCIe device is used and that it is properly inserted in the
PCIe slot. For a list of supported devices, contact the service provider.
Category System Health (IOV = IO Virtualization)
Severity Severity 2 (Warning)
Trap/EventID 2554
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔
CMC ✔ ✔* ✔* ✔
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC ✔* ✔* ✔ ✔*
669