Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔ ✔
CMC ✔ ✔ ✔ ✔
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC ✔* ✔*
HWC7014
Message An invalid cable or incorrect cable configuration is detected.
Detailed
Description
An invalid cable related hardware configuration detected on the system.
Recommended
Response
Action
Make sure the hardware and related cables are installed correctly. For information
about configuration and installation procedures, see the systems Owners Manual
available at the support site.
Category System Health (HWC = Hardware Config)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC ✔
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔
HWC8000
Message Unknown device plug event occurred at this location: arg1 . Additional Details:
arg2 .
Arguments arg1 = device location, arg2 = details
Detailed
Description
An unknown device plug event occurred at the identified device location. Along
with the device location, additional event details are provided if available.
Recommended
Response
Action
No response action is required.
632