Reference Guide

HWC1103
Message The arg1 installed in an unsupported slot arg2 is removed.
Arguments arg1 = module name, arg2 = slot number
Detailed
Description
The peripheral sled identified in the message is removed from the unsupported slot
identified in the message.
Recommended
Response
Action
No response action is required.
Category System Health (HWC = Hardware Config)
Severity Severity 3 (Informational)
Trap/EventID 2331
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔* ✔* ✔* ✔
CMC ✔ ✔* ✔* ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔*
CMC ✔* ✔*
HWC1104
Message The arg1 installed in slot arg2 is not supported by the chassis.
Arguments arg1 = module name, arg2 = slot number
Detailed
Description
The peripheral sled identified in the message that is inserted in the slot identified in
the message is not supported by the chassis or the current CMC firmware version.
Recommended
Response
Action
Make sure that the peripheral sled identified in the message is supported by the
chassis and the CMC firmware. For information about the supported sleds and
firmware versions, see the System Manual available at the support site.
Category System Health (HWC = Hardware Config)
Severity Severity 2 (Warning)
Trap/EventID 2330
589