Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
HWC0009
Message Unable to enable vFlash SD card.
Detailed
Description
The vFlash SD card is missing or not inserted correctly. iDRAC is not able to enable
vFlash SD card.
Recommended
Response
Action
Reinsert the vFlash SD card and retry the operation. If the problem persists: 1) Turn
off the system and disconnect the power cord. 2) Wait for five seconds. 3)
Reconnect the power cord, turn on the system, and retry the operation.
Category Configuration (HWC = Hardware Config)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
HWC0010
Message Invalid folder name or USB drive not found.
Detailed
Description
Operation failed because the folder name entered is incorrect or the USB drive is
disconnected.
Recommended
Response
Action
Enter a valid folder name or attach the USB drive and retry the operation.
Category Configuration (HWC = Hardware Config)
Severity Severity 1 (Critical)
574