Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
HWC0003
Message Successfully initialized vFlash SD card.
Detailed
Description
vFlash SD card was successfully initialized.
Recommended
Response
Action
No response action is required.
Category Configuration (HWC = Hardware Config)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
HWC0004
Message Unable to initialize vFlash SD card.
Detailed
Description
The vFlash SD card is incorrectly inserted, the vFlash SD card is faulty, or there is an
iDRAC communication failure.
Recommended
Response
Action
Reinsert or replace the vFlash SD card, or reset iDRAC, and retry the operation. If
the problem persists: 1) Turn off the system and disconnect the power cord. 2) Wait
for five seconds. 3) Reconnect the power cord, turn on the system, and retry the
operation.
Category Configuration (HWC = Hardware Config)
Severity Severity 1 (Critical)
571