Reference Guide

HWC Event Messages
HWC0001
Message Unable to complete the operation as there is no response from iDRAC.
Detailed
Description
The error is caused due to iDRAC failure.
Recommended
Response
Action
1) Turn off the system and disconnect the power cord. 2) Wait for five seconds. 3)
Reconnect the power cord and turn on the system.
Category Configuration (HWC = Hardware Config)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
HWC0002
Message Unable to detect vFlash SD card.
Detailed
Description
The vFlash SD Card is either not present or not correctly inserted.
Recommended
Response
Action
Insert the vFlash SD card or reinsert the vFlash SD card, and retry the operation.
Category Configuration (HWC = Hardware Config)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
570