Reference Guide

FC008
Message No pending data present to create a Configuration job.
Detailed
Description
No changes are available between the previous configuration and the current
configuration. To create a Configuration job, change at least one attribute.
Recommended
Response
Action
Change the configuration of one or more attributes and retry creating the
Configuration job.
Category Configuration (FC = Fiber Channel)
Severity Severity 3 (Informational)
No alerts are applicable for this message
FC009
Message Lifecycle Controller is currently in use.
Detailed
Description
Lifecycle Controller cannot gain access to internal storage due to use by another
application or operation.
Recommended
Response
Action
Wait for Lifecycle Controller to complete the current operation. Make sure that the
system is: 1) Not currently in Lifecycle Controller Unified Server Configurator 2) Not
waiting for user intervention at F1/F2 POST error 3) Not in any of the device or
controller Option ROMs and retry the operation.
Category Configuration (FC = Fiber Channel)
Severity Severity 2 (Warning)
No alerts are applicable for this message
FC010
Message Unable to create Configuration job because Lifecycle Controller is not enabled.
Detailed
Description
For 11G systems: System Services must be enabled to perform the requested
operation. System Services has been disabled through the iDRAC configuration
utility accessed by pressing CTRL+E on boot up or through a remote operation. For
12G systems: Lifecycle Controller must be enabled to perform the requested
operation. Lifecycle Controller has been disabled by pressing F2 Setup, selecting
iDRAC Configuration, and selecting Lifecycle Controller Settings on boot up or
through a remote operation.
Recommended
Response
Action
For 11G systems: Use the iDRAC configuration utility to enable the System Services
by pressing the CTRL+E option on boot up at the targeted system. For 12G
systems: Use F2 Setup, select iDRAC Configuration, and select Lifecycle Controller
Settings, to enable the Lifecycle Controller on boot up of the targeted system.
Category Configuration (FC = Fiber Channel)
535