Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
FAN908
Message The Enhanced Cooling Mode feature is already disabled.
Detailed
Description
The Enhanced Cooling Mode feature is already disabled.
Recommended
Response
Action
No response action required.
Category Configuration (FAN = Fan Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
FAN911
Message The attempt to enable the Enhanced Cooling Mode was not successful.
Detailed
Description
The attempt to enable the Enhanced Cooling Mode (ECM) was not successful
because ECM is already enabled or Gen3 fans are not present in the Chassis.
Recommended
Response
Action
Check whether or not the Enhanced Cooling Mode (ECM) is already enabled. Make
sure there are Gen3 fans in the Chassis and retry the operation.
Category Configuration (FAN = Fan Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔
CMC
530