Reference Guide

FAN8500
Message Enhanced Cooling Mode is Enabled
Detailed
Description
Enabling Enhanced Cooling Mode will provide increased airflow capability to the
blades by increasing the maximum allowable blower speed at the cost of increased
power consumption.
Recommended
Response
Action
No response action is required.
Category Audit (FAN = Fan Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
FAN8501
Message Enhanced Cooling Mode is Disabled
Detailed
Description
Disabling Enhanced Cooling Mode allows for reduced power consumption by
reducing the maximum speed of the blowers while still providing sufficient blade
airflow.
Recommended
Response
Action
No response action is required.
Category Audit (FAN = Fan Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
FAN8502
Message Unable to detect the blower arg1 because the blower may not be optimally
operating.
Arguments arg1 = blower name
Detailed
Description
The current CMC firmware did not detect the blower identified in the message.
Recommended
Response
Action
Make sure that CMC is using the latest firmware, and then retry the operation.
Category Audit (FAN = Fan Event)
Severity Severity 3 (Informational)
524