Reference Guide

Recommended
Response
Action
Replace the fan identified in the message with another fan which supports
Enhanced Cooling Mode.
Category System Health (FAN = Fan Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
FAN0019
Message An incompatibility between operating mode and fan type was corrected for fan
arg1 .
Arguments arg1 = fan number
Detailed
Description
An incompatibility between operating mode and fan type was corrected for the fan
identified in the message.
Recommended
Response
Action
No response action is required.
Category System Health (FAN = Fan Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
FAN0020
Message The arg1 is non-functional.
Arguments arg1 = fan name
Detailed
Description
The fan identified in the message has failed or it is not installed correctly.
Recommended
Response
Action
Remove and re-install the fan or replace the fan, and open the OMSA Web
interface to verify if the fan specified in the message is displayed correctly. If the
issue persists, contact your service provider.
Category System Health (FAN = Fan Event)
Severity Severity 1 (Critical)
OMSA Event ID 5300
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔
CMC
517