Reference Guide

ENC30
Message arg1 firmware download is in-progress.
Arguments arg1 = Enclosure Name
Detailed
Description
This alert is provided for informational purposes.
Recommended
Response
Action
No response action is required.
Category Storage (ENC = Storage Enclosr)
Severity Severity 3 (Informational)
Trap/EventID 4339
OMSA Event ID 2354
OMSA Trap ID 85100
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC ✔ ✔* ✔ ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔ ✔* ✔
ENC31
Message Firmware download on arg1 has failed.
Arguments arg1 = Enclosure Name
Detailed
Description
The system was unable to download firmware to the enclosure. The controller may
have lost communication with the enclosure. There may have been problems with
the data transfer or the download media may be corrupt.
Recommended
Response
Action
Attempt to download the enclosure firmware again. If problems continue, verify
that the controller can communicate with the enclosure. Make sure that the
enclosure is powered ON. Refer to the storage hardware documentation for
information on checking the cables.
Category Storage (ENC = Storage Enclosr)
Severity Severity 2 (Warning)
Trap/EventID 4338
497