Reference Guide

Arguments arg1 = controller name
Detailed
Description
There are too many enclosures attached to the controller port. When the
enclosure limit is exceeded, the controller loses contact with all enclosures
attached to the port. This is an unsupported configuration.
Recommended
Response
Action
Remove the extra enclosures. Refer to the storage hardware documentation for
maximum number of enclosures that can be connected.
Category Storage (ENC = Storage Enclosr)
Severity Severity 1 (Critical)
Trap/EventID 4337
OMSA Event ID 2191
OMSA Trap ID 85400
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔ ✔
CMC ✔ ✔* ✔ ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC ✔ ✔* ✔
ENC15
Message An enclosure blink operation has initiated on arg1 .
Arguments arg1 = Enclosure Name
Detailed
Description
This alert is provided for informational purposes.
Recommended
Response
Action
No response action is required.
Category Storage (ENC = Storage Enclosr)
Severity Severity 3 (Informational)
Trap/EventID 4339
OMSA Event ID 2259
OMSA Trap ID 85100
486